slosh.git/src/app.c, branch v0.1.8

osc 5577: `busy`, and a sidebar that shows it (busy_mark)

2026-09-22T13:12:02Z

A status is a line of text, and a line of text cannot say whether it is still true. "building 3/7" reads exactly the same while it builds and ten minutes after it stopped, which is the one thing somebody reading it from another tab wants to know -- and the only workaround available to a program was to write the answer into the words and keep rewriting them. So `busy`: printf '\033]5577;1;status;make test\033\\' printf '\033]5577;1;busy;1\033\\' ... printf '\033]5577;1;busy;0\033\\' A flag of its own rather than a field of `status`, because a status is the *whole* payload after the verb -- `status;a;b;c` has always been the text "a;b;c" -- so anything added to that line would change what every existing sender means, including the five pi extensions D1 promises byte compatibility to. Orthogonal, so a program can leave one line up and toggle the other; anything but 0/false/no/off is on; `clear` takes both; and a pane whose program has gone is never busy, whatever it last claimed, because a spinner turning under a dead tab is a lie you keep looking at. In a sidebar the row turns `tab_status_busy` -- the theme's accent, derived like the other status colours, so no theme needs a line -- and takes a spinner in the column `tab_bar_padding` was already holding blank, so nothing reflows when a program starts or stops working. `busy_mark` is the frames, separated by spaces: one frame is a static mark and costs nothing, several make it turn, and only then does the session keep a frame clock -- via the same `animating` flag an animated shader uses, so the cost lands only while such a row is actually composed, and `""` drops the mark entirely and leaves the colour to say it. The frame is a pure function of the clock, like every other pulse here, so two clients attached to one session show the same one. `panes` now reports `status` and `busy`, which is the scriptable half of the same fact: what a pane says about itself, without reading its screen.

themes: ask the binary where it is, not the prefix it was built for

2026-09-22T10:57:26Z

`theme_name "sl0p"` with all seven themes sitting in /usr/share/slosh/themes: "no theme named sl0p". The lookup knew two places -- your own themes directory and the PREFIX this build was compiled with -- and on that machine the first did not exist and the second was /usr/local, because that is the Makefile's default and the package was built with PREFIX=/usr. Neither was where the themes actually were, and nothing in the search could ever have found them. A compiled-in prefix is a guess about where the binary will end up, and the binary is the one thing that knows where it really is. So the search now asks it: path_self() (/proc/self/exe, _NSGetExecutablePath, GetModuleFileName -- lifted out of server.c, which was already doing this for SLOSH_BIN) gives /../share/slosh/themes for an installed slosh wherever it was installed to, and /contrib/themes for one being run out of a build tree, which makes a checkout able to name a theme without installing anything first. The compiled-in prefix stays as the last candidate, for a binary sitting somewhere that says nothing about its data, and duplicates collapse so the usual install does not report the same directory twice. Your own directory is still first and still shadows everything, which is the property that matters; the rest is about the shipped set being findable at all. The tests that assumed a closed world of two temp themes now narrow to their own names by typing, since the shipped ones are (correctly) always in the list -- and the "no themes anywhere" toast lost its test, because with the shipped set reachable that state takes a binary with nothing beside it. The case that started this is a test of its own.

themes: a picker that wears them as you browse (C-a t)

2026-09-22T10:50:12Z

`theme_name` is a line in a file, and a name in a list tells you nothing about a colour scheme. So the picker previews by *applying*: moving the selection puts that theme on, which is the only honest preview of a palette meant to dress a whole session -- a swatch in a list would be a small lie about it, and the session is already on screen behind the box. It opens on the theme being worn rather than at the top, so the first arrow press moves off it instead of silently changing the session, and the row your config names says so, because "which one is this" and "which one comes back on restart" are two different facts the moment you switch. Escape puts back what was worn, since a picker that changed your session by being looked at is one you stop opening. Enter keeps it for the session and says as much. Only C-s writes `theme_name` into your config, which is the one place in the UI where a keystroke edits it, so it is a deliberate chord and the footer says so: "C-s keeps it, esc undoes". Reuses the picker the finder, the palette and the projects list already wear -- one machine with a subject, so the query, the selection, the mouse, the frame and the scroll behaviour are the ones already tested. The list is scanned on the keystroke, like the projects are: the moment it opens is the moment it has to be right, and a theme written since the session started is exactly the one being looked for. With nothing to list it toasts the directory it looked in rather than opening an empty box. `t` was free: tabs cycle on tab, and new-tab has had `c` since the first day.

theme: a name and a directory, not sixty colours in your config

2026-09-22T10:42:15Z

Wearing a theme meant pasting its `theme { }` block into config.kdl, or including a path to a file you had copied there yourself. Both make the palette a literal in your config, and a literal is the one thing you cannot change cheaply: not from a script, not from a running session, not by a list of what is available, and never again from upstream -- the colours you pasted are the colours that theme had the day you pasted them. So a theme is a file in a directory now, and a config names it: theme_name "phosphor" theme { frame_focus "#00ff88" } // ...but that one colour is mine theme_name is applied after the includes and before everything the file says itself, which is the rule includes already follow and for the same reason: the loader reads a document by asking it for names rather than walking it in order, so "here" is not a position it could honour, and "what you asked for is the base, what you wrote is yours" is the rule worth having. Two directories, yours first: `themes/` beside the root config -- beside the file that was loaded, so a config somewhere else (SLOSH_CONFIG, or one handed to --check) takes its themes with it -- and then /share/slosh/themes, compiled in from PREFIX. install(1) has been putting themes there all along and nothing could read them; now a shipped theme is nameable without being copied, and a file of yours with the same name shadows it, which is how a root-owned theme gets edited. A name, not a path. The directory is what makes a theme switchable, listable and shadowable, and a path silently does none of those, so `theme_name "../x.kdl"` is refused with a line pointing at `include`, which still works and is still the answer for a file somewhere a directory of names cannot reach. A theme that is not there is one complaint and no more (D9): the rest of the config applies, because losing your keybindings over a mistyped colour scheme would be the wrong trade. A theme file is read by the same loader, so it is watched like any other: saving one reloads the session wearing it, and the derivations (tab_status_fg, tab_idle_bg) run over the theme's own colours exactly as before. Switching without editing anything, over the socket a session already has: slosh -s main cmd theme # amber default* ... slosh -s main cmd '{"cmd":"theme","name":"amber"}' # now slosh -s main cmd '{"cmd":"theme","name":"amber","save":true}' The session holds the name over later reloads, so saving your config for an unrelated reason does not put the old colours back; `save` writes the theme_name line into the file, replacing the one already there and leaving every other line and comment alone -- dumping the whole config back over itself would reformat a hand-written file and drop its comments, which is not a fair price for changing a colour scheme. A name is tried on a throwaway config first, so a typo costs nothing. An empty name gives the answer back to the file. --dump-config stops writing colours: it writes the theme's name and the colours a config overrode by hand, so a dumped config keeps following its theme instead of freezing it. --dump-theme is the other half and is new: the resolved palette as a theme file, which is how you start one from the session in front of you rather than from an empty file. It is also what keeps contrib/themes/default.kdl honest -- that file is now the annotated reference (the commented palette moved there out of config.kdl, where it was 119 lines of colour in the middle of the prose), and a test compares it against the compiled-in one. While in there: tests/test_themes.py's "every theme sets every colour" guard had been grepping for `&c->`, the spelling before the colour table moved to offsetof, so it had been finding zero colours and passing for months. Fixed, with the derived and opt-in colours exempted for the reasons they are derived and opt-in, and with a check that the guard found a table at all.

search: a scrollback search bar on /, matches highlighted

2026-09-08T14:58:24Z

C-a / opens an inline search bar on the focused pane's status row, on lib-vt's GhosttySearch (D4's pattern: the scrollback walk, reflow and alt-screen survival are the library's, the UI and the wiring are ours). Type to search live; the viewport follows the current match; up/down (or C-n/C-p) step through them with wraparound; Enter keeps your place, Escape snaps back. A k-of-n counter reads on the right, or "no matches". Every match on screen is tinted, and the one the bar is on is tinted apart -- warm gold by default, painted after the shader pass so the scrolled wash does not dilute a match you are hunting for. Four themeable colours (search_fg/bg, search_cur_fg/bg). Bare / took the key from help, which keeps ?; that needed the legacy decoder to read the shift out of a punctuation byte the way it already did for capitals -- without it ? and / decode identically (SLASH, no mods) and cannot be two keys on a client without the kitty protocol. tests/test_search.py drives it end to end (39 checks): the bar, the counter, stepping and wrap, all-match vs current highlighting, Enter/ Escape, new output updating the count, case-insensitivity, the keyboard belonging to the bar, click-away, and that / and ? no longer collide.

app: cut the modals, toasts and splash out of the images under them

2026-09-06T18:34:26Z

Overlays are painted over the panes and the compositor needs no more than that: painted later is on top. A placement is not painted, though -- the client's terminal draws the image over the cells, in whatever order they arrived -- so an overlay that is only drawn is an overlay an image sits on top of. The cheatsheet came up under a picture and was unreadable through it, in the terminal and in the mirror both. So a frame now records where its overlays landed, and the graphics pass takes them out of a placement exactly as it takes out a float: the modal's box (the cheatsheet and the picker wear the same frame), each toast, and the splash. The list is rebuilt every compose, so a rect that is not registered again is one that is no longer on screen. Only the opaque things are registered. The scrim behind a modal tints what is behind it rather than hiding it, and an image cannot be tinted by us at all -- so a picture beside the cheatsheet stays bright while the text around it is pushed back, which is wrong-looking but a great deal better than the image disappearing while a modal is up. Co-Authored-By: Claude Opus 5 (1M context) Claude-Session: https://claude.ai/code/session_01CRz3zwZJvBvzsR9k4cj6dd

attach tag: just the count, in theme colours

2026-09-02T13:09:36Z

The +x+y offset goes -- 'N clients' says the thing that matters. The inverse-video chip goes with it: the tag now draws in attach_fg / attach_bg from the theme, defaulting to gray ink on the terminal's own background. Standing information, not an announcement.

multi-attach: say who else is watching, and where you are

2026-09-02T13:03:53Z

A small tag in each client's own top-right corner when several terminals share the session: the viewer count, and on a view that is a crop being panned by somebody else's cursor, the crop's offset into the shared screen ("2 clients +12+4") -- which is exactly the moment a screen moving on its own needs explaining. Stamped per client after projection, because every terminal has its own count of others and its own offset; the shared status bar is composed once and can be cropped out of a panned view anyway. attach_indicator false hides it.

multi-attach: the config knobs

2026-09-02T12:57:13Z

The patch made shared attach unconditional; these make it a policy. multi_attach false restores the classic displacing attach (EXIT_REPLACED, which old clients already understand). size_follows picks whose size the shared screen takes: active (the patch's rule), smallest (the tmux rule: filler, never a crop), or largest. The size fold lives in apply_canvas, so any attach, resize or departure can move the canvas under the folding policies -- including a non-active client leaving, which under smallest may have been the very client holding the floor down. A config reload re-applies both knobs to the running session.

Add competitive multiplayer support.

2026-09-02T12:51:02Z

Last input wins, canvas size is adjusted to active connection.