an opinionated terminal multiplexer in C with programmable pane chrome https://git.sl0p.foo/slosh.git/atom/src/config.c?h=v0.1.3 2026-09-02T13:09:36Z 2026-09-02T13:09:36Z user user@clank 2026-09-02T13:09:36Z urn:sha1:cafa48e0a7e1eb48a783bfde6862c5fd82c7aede The +x+y offset goes -- 'N clients' says the thing that matters. The inverse-video chip goes with it: the tag now draws in attach_fg / attach_bg from the theme, defaulting to gray ink on the terminal's own background. Standing information, not an announcement. 2026-09-02T13:03:53Z user user@clank 2026-09-02T13:03:53Z urn:sha1:1a3ba183ae8f2613cae847c8f6460782512acc40 A small tag in each client's own top-right corner when several terminals share the session: the viewer count, and on a view that is a crop being panned by somebody else's cursor, the crop's offset into the shared screen ("2 clients +12+4") -- which is exactly the moment a screen moving on its own needs explaining. Stamped per client after projection, because every terminal has its own count of others and its own offset; the shared status bar is composed once and can be cropped out of a panned view anyway. attach_indicator false hides it. 2026-09-02T12:57:13Z user user@clank 2026-09-02T12:57:13Z urn:sha1:d698946464f25a0eb43730ffad15656f3247f56b The patch made shared attach unconditional; these make it a policy. multi_attach false restores the classic displacing attach (EXIT_REPLACED, which old clients already understand). size_follows picks whose size the shared screen takes: active (the patch's rule), smallest (the tmux rule: filler, never a crop), or largest. The size fold lives in apply_canvas, so any attach, resize or departure can move the canvas under the folding policies -- including a non-active client leaving, which under smallest may have been the very client holding the floor down. A config reload re-applies both knobs to the running session. 2026-09-02T12:43:09Z user user@clank 2026-09-02T12:43:09Z urn:sha1:18d1aef0f9bf4620135fd9f77f26683e6f2f8c00 The static musl release builds cannot dlopen -- musl compiles it out -- so loadable shader plugins were a feature most shipped binaries could not use. Nothing we ship used it either: every shader in contrib/shaders is an expression. Gone: the dlopen/glob loader in shader.c, shader_dir in the config, the plugin ABI table and entry macro, the Windows dl*/glob shims that existed only for it, the contrib/shader-plugin skeleton, its tests, and every doc mention. shader_abi.h stays as the shader model (cell_t, shade_ctx_t, shader_t) with a note about what it used to be. 2026-08-28T13:09:18Z Peter Geissler peter@haxx.in 2026-08-28T13:04:28Z urn:sha1:6f8bdf838b82c0c3326993a741985840dc130af6 Two places split a path by hand, both with strrchr(path, '/'), both falling back to "." when there was none: include_path() in config.c and watch_config() in server.c. On Windows "none" is the ordinary case. `SLOSH_CONFIG=C:\Users\you\slosh\config.kdl` is how a person writes it, and a path that has been near a native API comes back all backslashes whatever it started as. So an include resolved against "." -- `cannot open ./themes/t.kdl` -- and, worse and quietly, the config watcher watched "." too. Not the config's directory: the current directory of whatever started the session. Hot reload did not fail, it watched somewhere else and waited. Saving your config did nothing at all, with no error to go looking for. The default path escaped this by accident. slosh builds it as `C:\Users\you/.config/slosh/config.kdl` -- mixed, because a literal joined to $HOME always is -- and that one embedded '/' is what strrchr found. It worked for the path slosh writes and not for the one a user does. Both callers now use path_dir(), which learns to stop at a backslash too, and server.c takes path_base() for the other half rather than keeping its own copy of the arithmetic. Windows-only: a backslash is a legal character in a POSIX file name, and splitting on it there would invent a directory out of a file called `a\b`. path_dir() also keeps the separator when what is left would be a bare drive, because `C:\config.kdl` lives in `C:\` and `C:` names the current directory on drive C, which is a different place. Verified on the Windows box with a fully backslashed SLOSH_CONFIG: --check passes, the include loads, and editing the config reloads the running session. Watching a second directory is still unreliable; that is the watcher's own bug and the next commit. 2026-08-28T13:02:49Z Peter Geissler peter@haxx.in 2026-08-28T13:02:49Z urn:sha1:22e70baa7172e8487913cceae3d3ec89bbe40627 `include "C:/themes/t.kdl"` on Windows did not fail to find the file. It found a different one, or rather looked for it: absoluteness was tested as `path[0] == '/'`, a drive letter is not that, so the path was read as relative and joined to the including file's directory. The result was cannot open C:/Users/you/cfgA/C:/Users/you/cfgB/t.kdl which at least says what happened. A layout's `cwd="C:/srv/api"` took the same turn through path_resolve() and said nothing at all -- the pane started in the wrong directory, which is the failure this file's own header comment is about. Windows spells absolute three ways and all three now count: rooted on the current drive (`\dir`), rooted on a named one (`C:\dir`, `C:/dir`), and a UNC share. A drive letter has to be followed by a separator to qualify, because `C:file` is relative to the current directory *of that drive* -- a real thing, and not one we can resolve for anyone. Windows-only, deliberately. `C:` is an ordinary file name on POSIX and a path beginning with one is relative there, so reading it as a drive would break the platform that works in order to fix the one that does not. 2026-08-28T12:41:42Z Peter Geissler peter@haxx.in 2026-08-28T12:41:42Z urn:sha1:2fbd36c1cef6ea6c9fcf9c36afb5209089288257 Windows has no VEOF. The console driver does not know the character, so ^D arrives at cmd.exe and PowerShell as an ordinary keystroke and they ignore it -- it even echoes, which is how you find out: the line reads `echo hello^D`. The one key that closes a pane on every other platform does nothing at all, and closing a pane becomes a word you have to type. That you can type `exit` instead is the tell: the intent was never ambiguous, only unspoken. So slosh speaks it. What goes to the pane is the word, not a signal and not a close from outside -- the shell runs its own cleanup, returns its own status, and keep_dead decides what is left behind, all three of which reaching past it would skip. It is also what the user would have typed, so there is nothing new to explain. The knob is what makes it honest, because a wrong guess costs a pane. It fires only with the shell itself in the foreground (a program that is running may want the EOF for itself -- `cat` reading to end is the whole job), only on the primary screen (in an editor or a pager ^D is half a page down, and the alternate screen is the pane stating that rather than us matching process names), and only on an empty line (POSIX sends EOF there; what it does not do is discard what you typed). The line is an estimate. The shell's editor is on the far side of a pty, so pane_send_key counts what it forwarded since the last Enter. Editing it does not model -- a recalled history entry, ^U, completion -- leaves the count too high, which forgets to exit. That is the direction to be wrong in; the other one throws away a half-typed command. Default true on Windows, false on POSIX, where the line discipline already does this and does it properly: ^D there is also EOF for `cat` and every REPL, none of which is ours to intercept. A knob rather than an #ifdef so the guards are the same code everywhere and can be tested where the test suite runs -- test_ctrl_d.py turns it on and drives all four decisions, plus the case that does exit. Telling trapped from forwarded needs a program that reports what it received: on POSIX a forwarded ^D also ends an idle shell, and looking for the word `exit` cannot separate them either, because bash prints `exit` itself on EOF. Verified on the Windows box as well, where it is the default: ^D at an idle cmd.exe prompt takes the pane (and with it the session, having no panes left), `more` in the foreground keeps its own EOF, and a half-typed line survives with the line still on screen. 2026-08-27T13:09:02Z user user@clank 2026-08-27T13:09:02Z urn:sha1:2ee881452aa4b19701a071f0333a15265e3b314e Text taller than the viewport was not selectable in one gesture: the drag stopped dead at the pane's border. Two faults, one visible and one waiting. The visible one: DRAG_SELECT motion subtracted the content origin in uint16_t, so a pointer above or left of the pane underflowed, the grid lookup failed, and the selection froze. The waiting one: the anchor was a pair of *viewport* coordinates re-resolved on every extend, so the moment anything scrolled mid-drag the anchor would have drifted with the viewport, re-anchoring to whatever slid under the press. The anchor is now a tracked grid ref -- the thing lib-vt documents as being for 'long-lived anchors such as selections' -- so it follows its cell across scrolling, pruning and reflow, and only the near end of the selection moves. If a program flooding output prunes the anchored row out of scrollback entirely, the selection keeps what it had; there is no cell left to anchor a new answer to. Motion clamps into the content rect (a pointer past an edge is pointing at the nearest cell), and holding past the top or bottom edge scrolls on a clock rather than on motion, because a resting pointer sends no events and 'keep going' is exactly what resting it there means. app_tick() does the step, app_next_deadline_ms() wakes the poll loop for it -- the same mechanism toasts and hover guides already use -- and both front ends call the tick, so the behaviour exists under the server and the headless harness alike. Rows per step is how far past the edge the pointer sits: one row past creeps, further hurries, so the hand already dragging is also the throttle. The metronome is select_scroll_ms, a knob so the test can configure the clock down instead of sleeping. The test drags to one row above the pane and simply holds: the viewport walks to the top of scrollback (clamping makes the endpoint exact), the copy starts at a line that was never on screen with the press, and still ends at the pressed row -- that last check is the tracked anchor's. 2026-08-25T12:23:33Z user user@clank 2026-08-25T12:23:33Z urn:sha1:b744a90859bf248bfbea97f990668301b5fa9537 One knob, `compact true`: panes pack flush against 1-cell divider lines that meet in real junctions, one frame rings the tab, and a pane's title rides the line above it -- a boundary costs one cell where the default look spends four. The lines are strokes: each write says which edges of its cell it needs, unions with what is there, and never clobbers text, so ├ ┬ ┼ fall out of paint order and the focus ring recolours without inventing arms. The divider *is* the gap (eff_gap, one answer for the layout, split_fits and the resize clamp), so gap hits, hover hints and corner drags work unchanged. Interior edges give up click-to-split -- one cell cannot hold two verbs -- and a pane's status row overlays its last content row. Floats, zoom and the D6 flatten keep classic frames through place_hidden: zero new tree cases. Underneath it, mode or no mode: a border drag now moves the boundary on that side, converted on the first motion so the press that never moves keeps its old meaning -- the handle's click still splits, the rim's is still deliberately nothing (drag.rim). Which is also the fix for gap 0, where flush panes leave no gap cell to grab and the resize gesture had silently vanished with it. 2026-08-20T22:27:58Z user user@clank 2026-08-20T22:27:58Z urn:sha1:2e74c6dceef18f75b849c729bd768330f73396fb Plain ASCII that says what it means, over a dot that had to be noticed. The mark was always a short string rather than a glyph (the emoji-width argument in config.kdl stands); the default just stops being shy.