| Commit message (Collapse) | Author | Age |
| ... | |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
chrome> :load sine-comet
sine-comet.kdl: 1 chrome, 0 content
chrome> :paste
// sine-comet.kdl
include "/home/user/dev/sl0ppty/contrib/chrome/sine-comet.kdl"
A path, or the bare name of anything in `chrome/` or `shaders/` beside the
script, from any directory. Entries land wherever their own `where=` says, so one
file can fill both chains and a preset goes where its author put it. Tab completes
filenames after `:load` and vocabulary everywhere else.
**The prompt does not parse the file.** I started writing the scanner -- find the
`shaders {` block, count braces, strip `//` outside quoted strings so that
`color="#ff0033"` and `t / 8` survive -- and stopped, because that is a second
reader of a format that already has one, and the two would disagree exactly where
comments meet strings. Instead the session gets the path and reads it with the
parser it already has: `config_parse_chain_file`, built on the same
`parse_shader_entry` a config file goes through. Anything that is not a top-level
`shaders { }` block is ignored, so a whole `config.kdl` can be handed over and
only its shaders apply.
The alternative was regenerating all 45 presets into something easier to read from
Python. That would have cost them what makes them useful: each one is a config
fragment today -- pasteable, `include`-able, checkable with `sl0ppty --check`, and
loaded as a config by `tests/test_chrome_presets.py`. A format only the prompt can
read would be a fourth thing to keep in step.
`:paste` after a load answers with an `include` line rather than the file's thirty:
the file is on disk, it is already the block, and reprinting it scrolled the pane
you were looking at -- which is how I noticed.
Both chains are built beside the live ones and swapped in together, so a file that
goes wrong half way leaves the pane as it was rather than wearing the half that
parsed. Each compiled expression is matched to the chain whose shader points at it
before either is installed; freeing a program the other chain still uses is the one
bug here that would not appear until the next repaint.
Verified: nine checks in `tests/test_shader_repl.py` -- a preset by bare name, a
file with both rects going to both chains, the three ways to be wrong (no such
file, no `shaders { }` block, no argument), what `:paste` says afterwards, and tab
completion. Then all 45 shipped presets loaded by name in one session: none
refused.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
sine-comet an arc gliding round, with a sine's shoulders
marching-ants two on, two off, stepping -- the selection marquee
standing-wave three lobes that do not travel; the pattern breathes
bit-drift position XOR clock, three bits: a machine thinking
heartbeat lub-dub, then a rest. For a state
xor-barcode the top rule as a barcode, sliding a character at a time
Each is a thing the old language could not say. `sin` and `TAU` give
`sin(TAU * p / perim)` -- this cell's position as an angle round one lap -- which
wraps at the corner for free, because so does a sine, and which fits any whole
number of lobes to the ring exactly. That last property is what makes a standing
wave stand: three lobes and three nodes, in the same places, breathing.
`>> 1 & 1` is a two-cell dash pattern in two operators, with no multiply and no
table; adding a slice of the clock marches it. `^` gives a motif that reshuffles
rather than slides, which is what a machine looks like when it is thinking and
not what any ramp looks like. And `abs(sin())` over a full turn is two humps, so
a heartbeat is one expression and a window mask.
Two techniques worth stealing from these, and now in the README: **overdrive then
clip** (`* 14 - 3000` after a sine keeps only the top of the crest, turning a glow
over everything into an arc), and the **angle idiom** itself.
Every one of them was measured before it was written down -- the perimeter
unrolled into an intensity strip, frame by frame, so an effect that "should"
travel is seen travelling. Two candidates did not survive that: a Sierpinski
`(x & y) == 0`, which on a ring lights the top and left solid and reads as a bug,
and a two-sine interference, which read as noise. `tests/test_chrome_presets.py`
picks up all six with no change, and asserts of each what it asserts of the other
seven: the frame moves, and the pane's own output does not.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Angles here are degrees, and pi in an angle language is not a number -- it is a
half turn. So `PI` is 180, `TAU` is 360, and a formula written the radian way
ports across as written:
sin(TAU * x / cols) one cycle over the pane's width
sin(TAU * p * 3 / perim) three lobes fitted exactly to a border
PI / 2 a quarter turn
PI / 6 thirty degrees, exactly
That last line is the argument. A numeric pi would be 3 in this language, and
`3.14159 / 6` in integers is 0 -- so radians cannot express a sixth of a turn
here at all, while degrees give it as a whole number. The pun is not a
compromise; it is the more precise reading of the two.
Which is why there is no `deg2rad` or `rad2deg` beside them, and asking for one
says `unknown function`. There is one angle unit. A conversion could only lose
the angle (`deg2rad(90)` is 1, and `sin(1)` is nearly nothing) or invent a second
scale for the language to disagree with itself about.
Spelled-out numbers rather than variables: they read no environment, carry no
dependency, and fold into the program like the literals they are. The browser
preview learned the same two, from the same table.
Verified: 12 cases in `tests/expr_test.c`, including that `deg2rad` and
`rad2deg` are refused; the cross-check agrees with the compiler on 700
evaluations, now including `sin(TAU * x / cols)` and friends.
Two smaller things ride along, both from the repl. `PI`/`TAU` tab-complete, and
its drift test grew a third table to check -- it already caught `sin`/`cos`
missing before I did. And it now checks the script *parses* before starting a
pane that runs it: I broke the indentation of one line here, and the failure
arrived as `IndexError: list index out of range` from a pane that died before
its prompt, which is a long way from "line 212".
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
128 + sin(t / 4) / 2 a breathe that is actually a sine
abs(sin(x * 6 + t / 5)) a wave travelling along a frame
abs(sin(dist(x, y, curx, cury) * 20 - t / 4)) / 2 ripples from the cursor
Degrees in, -255..255 out. Two decisions, both for the same reason -- this is a
language people type into a config file, not one they read a manual for.
Degrees because that is what anybody guesses, and 255 because it is the scale
every strength here already uses: `128 + sin(t / 4) / 2` is a breathe centred
half way up with nothing to rescale, and `abs(sin(...))` is an amount as it
stands.
Every angle wraps, negative ones included. `t / 4` does not stop at 360 and an
expression that died at one turn would be no use for the one thing this is for.
A 91-entry table of round(255*sin) at one-degree steps, three quadrants by
symmetry, no interpolation -- the argument is an integer and there is nothing
between two degrees to interpolate. A table and not a polynomial because
`contrib/shadertoy.html` reimplements this language in JavaScript so the preview
can run in a browser, and `tests/test_shadertoy.py` compares the two on every
expression: identical data with identical reduction cannot drift the way two
approximations of one curve would. The JS carries the same 91 numbers.
Until now the only oscillator was `abs(t / 6 % 510 - 255)`, a triangle wave
written as arithmetic. It works and it looks like what it is -- a ramp with a
corner in it. A sine has no corner, which is the whole difference between a pane
that pulses and a pane that flickers.
Verified: 19 cases in `tests/expr_test.c` (the cardinal angles, quadrant
symmetry, wrapping past a turn and below zero, and the breathe idiom); the
cross-check now agrees with the compiler on 660 evaluations including generated
trig; the repl's completion drift test caught `sin`/`cos` missing from its list
before I did, which is what it is for. Then six chains in a real pane -- breathe,
travelling wave, clipped crests, plasma, rolling scanlines, cursor ripples --
each measured over eight distinct frames.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
`&` `|` `^` `~` `<<` `>>`, on the 32-bit value the VM already used. There was
nothing: `x & 7` answered `unexpected trailing input at offset 2` and
`(x ^ y) % 16 < 2` answered `expected ) at offset 3`, which is a fair
description of a parser that had never heard of either.
`^` is the reason to bother. `(x ^ y) & 1` is the cheapest interesting texture
there is, and the language could express a sweep, a ramp and a comparison but
not one bit of pattern without `%` gymnastics.
**Bits bind tighter than comparison, which is not what C does.** `x & 7 == 0`
means `x & (7 == 0)` in C -- a precedence Ritchie put on record as a mistake,
kept for a decade of compatibility that a shader expression in a config file
does not have. Here it asks what it looks like it asks. Among themselves the
usual `&` then `^` then `|`; shifts stay where C has them, just under `+ -`.
`&&` and `||` still parse as themselves: the bitwise rungs decline the first
character when a second one follows it.
Semantics are JavaScript's, deliberately and to the letter -- the shift count
masked to five bits (`1 << 33` is 2), `>>` keeping the sign (`-8 >> 1` is -4).
Not taste: `contrib/shadertoy.html` reimplements this language in JS so the
preview can run in a browser, and `tests/test_shadertoy.py` compares the two on
every expression it can think of. Anything C leaves implementation-defined had
to be pinned to what JS would show, so the signed right shift is written out in
the VM rather than left to the compiler.
Verified: 22 new cases in `tests/expr_test.c` covering the operators, both
precedence questions, the sign, and the masked count; the preview learned the
same six operators and the same ladder, and the cross-check now agrees with the
compiler on 564 evaluations, including generated ones that reach for bits. Then
seven bitwise chains in a real pane -- an XOR texture, a drifting one, a stepped
pulse that walks eight shades of `t >> 7 & 7` and needs no `abs`.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
printf '\033]5577;1;shader;\033\\' # from the program
sl0ppty cmd '{"cmd":"clear-shaders","id":0}' # from outside it
bind "z" "clear-shaders" # from the keyboard
`app_clear_pane_shaders` empties both of a pane's chains and says whether
there was anything there, which is what lets a key answer "shaders cleared"
or "no shaders on this pane" instead of maybe having done something.
In-band it is not a new verb: naming no rect means all of them. `shader;`
sits under `shader;chrome;` and `shader;content;` as the degenerate case of
"which rect", so a program puts a pane back in one exchange and cannot leave
it half done. `contrib/shader-repl`'s `:both` now uses that rather than two.
**None of the three is gated on `in_band_shaders`.** A chain outlives the
setting that allowed it -- paint a pane, then turn the setting off, and the
paint is still there, because a chain belongs to the pane and not to the file
(there is a test that reloads with it off and clears anyway). A way out that
the setting can take away is not a way out. The operator path matters for the
same reason: the program that made a pane unreadable is not always in a state
to put it back.
They clear what the *pane* set. The config's chains and the session's own
dimming are not this pane's doing and are derived every frame anyway.
The action is bound to nothing, like `scroll-up`: it is in the palette, which
is what the palette is for, and the docs say to bind it if you leave the
setting on. Which is where a second bug turned up -- the palette truncates a
label at 26 characters, so "undo this pane's own shaders" read as "undo this
pane's own shade" on screen. Renamed to fit, and `tests/test_palette.py` now
checks every label against the column, since nothing failed for that: it just
looked like a typo in front of someone.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
`contrib/shader-repl` imports readline, which is most of it: editing,
up/down, ctrl-r, and history kept between runs in
`$XDG_DATA_HOME/sl0ppty/shader-repl.history`. Chains only -- a `:` command
is taken back out of the history it would otherwise fill, because pressing
up four times past `:quit` and `:paste` to reach the line you were working
on is the annoyance history exists to remove.
Tab completes the commands, the nine shader names, the property keys, the
two rects, the three channels, and the expression language's own variables
and functions. `:help` prints the lot at once, which is the same list from
the same place.
That list is a claim about what exists, so `tests/test_shader_repl.py`
checks it against `src/shader.c` and `src/expr.c` and fails if either grows
a name it does not have -- verified by removing `spotlight` and watching it
fail. Then it types every name it offers at a real prompt and requires `ok`
from a real session, because a name that completes and does not parse is a
lie with a keystroke attached. History across two runs, a tab completion,
and `:help` are driven the same way, through a pty.
Two things that cost me time and are now written down where they bite:
keys go into a pane escaped (`\r`, `\t`, `\e[A`) because `raw` takes the rest
of one command line and a literal newline ends the command instead of
arriving; and Enter is CR, which is what a terminal sends and what readline
waits for.
Also: **a bare argument on a shader entry is now a complaint.** Every
parameter is a property, so `tint color="#000000" spotlight` is not a pass
with a spare word, it is a missing `;` -- KDL reads one node, the second
name does nothing, and the session used to answer `ok`. It now says
`unexpected argument for tint: spotlight (separate entries with ';')`. Found
by watching the prompt get used.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
printf '\033]5577;1;shader;chrome;tint color="#ff5fd7" amount="abs(t / 8 % 510 - 255)"\033\\'
The field after `shader` is which rect -- `content` or `chrome` -- and the
rest of the payload is a chain in exactly the syntax a `shaders { }` block
uses, taken verbatim so that `;` can go on separating entries. Empty text
clears that chain. The session answers on the program's stdin, `shader-reply;ok`
or `shader-reply;error;bad amount for tint: ...`, because a prototyping loop
that gets no answer cannot tell a typo from a build without the feature.
`contrib/shader-repl` is the prompt this exists for: type a chain, watch the
pane, and `:paste` prints what you have as a config block. Both ends are the
same parser, so what you arrive at is what you can keep -- verified by
pasting `:paste`'s output into a file, linting it, and checking the frame
comes out the same colour.
**D13 said this was impossible on purpose, and the reasoning stands**: a
program that can restyle the session it happens to be running in is a hazard,
and `cat hostile.txt` should not dim your panes. But *impossible* was the
wrong shape for it -- editing a file, saving, looking and guessing again is
slow enough that shaders go unwritten. So it takes `in_band_shaders true`,
one line of consent, and it is scoped to the pane that asked: its own two
chains, never its neighbour's, never what the config said about anyone else.
There is a test for the neighbour.
Each chain owns the programs its expressions compiled to, and is swapped in
whole, so a chain that turns out not to read leaves the pane looking like it
did rather than half-restyled. Measured: 1,800 replacements of an animated
chain, resident size flat after the first pass.
Also here, because it is the same paint order: the chrome chain now sits
between the config's and policy's, exactly where the content chain does.
Dead code out -- `app_shade_add`/`app_shade_clear`/`app_shade_count` had no
callers and their comment claimed the opposite of what this commit does.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
contrib/gen-docs renders docs/ into a static site: one file of stdlib
Python and one stylesheet, no toolchain, no package manager, no npm. Same
argument as src/kdl.c being a hand-rolled KDL subset rather than a
library -- the input is ours, we know exactly which constructs it uses,
and a docs build that needs a lockfile is a docs build nobody runs.
What the Markdown subset understands is what docs/ actually contains:
headings (with anchors), paragraphs, fenced code, pipe tables, lists one
level deep, blockquotes, rules, `code`, bold, italic, links. Anything
else is escaped and passed through as text. A construct nobody uses is
not supported on purpose: it would be untested code pretending to be a
feature.
The layout is a sidebar of sections from docs/nav, the page, and its own
headings down the right; prev/next chains the nav order; a link to
another page is rewritten to its rendered page, so the same Markdown
reads correctly on a forge and on the site. The colours are the session's
own default theme, so the docs look like the thing they document, and the
light variant follows the reader's system preference rather than a toggle
nobody would find. Zero JavaScript -- the narrow-screen menu is a
checkbox.
Two things came out of looking at it in a browser rather than trusting
the HTML.
The hero diagram was hand-drawn and its lines were 78 and 79 columns
long, which is visible. It is generated from a real session now -- three
panes, a layout file, a text snapshot -- so it is exactly what the
program draws. Terminal art also needs tighter leading and a font whose
box drawing joins, so a fence with box characters in it and no language
is emitted as art rather than code and styled for that. Detected rather
than declared, because the alternative is a marker on every fence and one
of them getting forgotten. (Vertical rules still break between lines in
a browser: the glyph does not fill its em box, and no amount of CSS
changes that. Widths line up, which is the part that matters.)
The narrow-screen menu opened over a page that showed through underneath
it: as a grid child taken out of flow it kept its content height, so
`bottom: 0` did nothing. It has an explicit height now.
tests/test_docs.py checks both jobs. The site: every page in the nav is
rendered, carries the whole sidebar, is marked as current on its own
page, chains prev/next, and no internal link in the output points at a
file that is not there. The subset: each construct, and the one that
matters most -- markup inside a code span is not markup, because half of
these docs are shader expressions full of asterisks. A page missing from
docs/nav fails the build, and so does a nav entry with no file: an
unreachable page whose only symptom is its absence is the failure mode a
hand-written nav has.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Five things, in one commit because they land in the same few files --
the action table, the shader pass, config.kdl -- and splitting them by
hunk would buy a tidier log at the price of commits that do not build.
Each is verified end to end; the suite is 46 files green.
Chrome shaders. `where="chrome"` on any entry in `shaders` or in a
`states` block runs that pass over a pane's frame -- border, padding,
title, buttons -- instead of its contents. Nothing else changes: same
registry, same `amount`, same expressions, same chain order, one new
word, because a frame is another rect and so it is another pass. It runs
over the frame's whole rect with the contents punched out as a hole,
rather than four passes over four sides: an effect has to be able to
travel round a border, and four passes would each count x/y from zero
and restart at every corner. The hole keeps the two honest -- a skipped
cell is never visited, so a full-strength chrome tint cannot reach your
text. It is also the only kind of pass that can colour a pane a small
window has collapsed to a single row (D6), which is the state where a
colour is worth the most.
`channel="fg"|"bg"|"both"` came out of looking at the first border
flash: `tint` mixes both of a cell's colours, and a frame's background
is the terminal's own default, so the pass materialised it to our guess
at that default and mixed towards the colour -- a dark rectangle behind
the glyphs, left there until the pane changed state. The mask is
enforced by the pass, not the shader: the other colour is snapshotted
before materialising and put back after, so an unset colour goes back to
unset, it works for a built-in and a plugin alike, and no shader grows
an fg-only twin of itself.
A `bell` pane state and a `since` variable, because "flash the border
when a pane rings" needed both and neither existed. `since` is
milliseconds since the pane entered its current state, stamped in the
one function that decides the state -- a transition is the one thing a
frame cannot tell you, so it is remembered where it cannot disagree with
the state it dates. `bell` ranks above the ambient states and below
`dead`: a pane that rang while you were elsewhere is news, and a pane
that rang and then exited is a pane that exited. It ends when you look
at the pane, because that is what answering a bell is.
Animation needed a clock and did not have one: a shader reading `t` only
advanced when something else caused a frame, so a pulse froze the moment
you stopped typing. `app_next_deadline_ms` now reports `anim_ms` while a
chain that reads the clock ran over the last frame -- derived from what
was applied, so a pulse hung off `dead` costs a clock while a pane is
dead and nothing for the rest of the session. A `deadline` verb makes
that observable; the server's poll loop already lived on the number.
contrib/chrome has seven presets and the perimeter trick they are built
on: on a frame the coordinate you want is distance along the ring, which
the language can work out, and `min(d, P - d)` is what makes an effect
cross the corner it started from. Hand-written, unlike contrib/shaders,
because the toy previews contents and a frame has no preview to give --
so tests/test_chrome_presets.py checks each one the only way left: load
it into a real session, assert the frame moves and the contents do not.
`equalize` (C-a =) puts every share back to even: each split's children
weighted by how many visible panes are behind them, so one pane beside a
stack of three is a quarter of the width and "even" means the same thing
at every depth. Exactly equal cell counts are not something a tree can
always express, so the action promises the even division it can.
`rotate-layout` (C-a Space) turns the whole tab a quarter turn
clockwise. Every split changes axis and a row split's children reverse,
because the pane on top of a stack is the pane on the right once you
turn it; get that asymmetry wrong and you have a mirror image, which
looks almost right until four turns fail to come back. They do come
back, exactly, which is why the inverse is three more turns rather than
a second mirrored routine with its own chance of being wrong -- and why
a key as easy as space is the right one rather than a hazard. A turn is
refused when it would not fit: a share of the height is not always a
share the width can afford, and a node that cannot give its children
their floor takes the whole tab down to a list. So the turn is tried,
the layout is asked what it made of it, and one that flattened the tab
is put back with a word. Same rule `split_fits` applies to splitting.
Keys: the palette moves from `shift+p` to `p`, and cycling tabs from
`n`/`p` to tab/shift+tab. `p` is pressed far more often than "the tab
before this one" and was the only shifted letter in the defaults; tab is
what every other tabbed thing cycles with, and `\e[Z` decodes as
shift+tab on a plain terminal, so this costs nothing on a client without
the kitty protocol. `n` is free again. The actions are untouched: two
lines of config put the old binds back.
The shader ABI goes to 3: `shade_ctx_t` gained `state_ms` and struct
shader gained `channels`, both the pass's business rather than a
shader's. Plugins need a rebuild, which is what the version is for.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
`make coverage` builds a second binary with gcc's --coverage into build/cov,
runs every suite against it, and prints a per-file table from gcov. About a
minute. Nothing installed, nothing about the normal zig build changed.
gcc rather than clang because the counters need a gcov that matches the
compiler, and gcov is what this machine has -- no llvm-profdata, no llvm-cov,
no lcov, no gcovr. The aggregation is forty lines of python reading gcov's own
summaries, which is the whole reason this was cheap.
The suites drive it through $SL0PPTY_BIN, one line in the harness, so there is
no second copy of the test code and no risk of the coverage run testing
something else.
Two things about the result, both in the report itself:
- the C unit tests link the *same* instrumented objects, so input.c, kdl.c,
shader.c and expr.c are credited for the tests that exercise them. Built
separately, input.c read 54% while having a dedicated decoder test -- a lie
about where the tests are rather than about the code.
- server.c reads ~8% and is not untested. The session server is a daemonised
child ending in _exit(), which is right there and skips the flush gcov needs.
The counters are lost, not the tests. Said in the output, because an
unexplained low number invites someone to "fix" working code -- and changing
correct code to make a tool happier is the wrong trade.
Where it lands today: 85.4% of 6298 lines. The gaps that are real rather than
mechanical are jsonval.c (58%), screen.c (64%) and pty.c (59%) -- error paths
and the parts of the diff emitter that only a resize or a weird terminal
reaches.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Dogfooding this while building it has one sharp edge: a running session keeps
the binary it started with. `reload` re-reads the config, it cannot re-read
the code, so every build you want to try means losing your screen.
The only thing worth carrying across a restart is the shape, and sl0ppty
already knows how to read one -- it just could not write one. `dump-layout`
is the inverse of `--layout`: tabs with their names and purposes, how the
panes are split, in what proportion, in which directory, running what, which
tab was active and which pane had focus.
Two details make it worth trusting. The directory is where the shell *is*,
read from /proc, not where the pane was started -- after any amount of `cd`
those differ and only one of them is useful. And a pane running the session's
default shell is dumped with no `command`, so it comes back as a shell rather
than as a shell wrapped in a shell, one layer deeper every restart.
contrib/sl0ppty-dev is the loop: attach, and when the session ends because you
asked for a restart, come straight back with the layout. It is two halves
because it has to be -- `restart` runs inside the session, and the moment the
session ends so does the shell it was typed in, so it leaves the layout and a
note and the loop outside picks them up.
What does not come back is what was running *inside* a program. A shell
returns as a shell, in the right directory, with an empty history. That is the
limit of restoring a layout rather than a session, and the script says so
rather than implying otherwise.
Three bugs found by the round-trip test, all the same kind -- a dump that
loads without complaint and rebuilds something subtly different:
- `split=` belongs on the node that *has* the children, not on the children.
Written the other way it parses fine and gives the wrong tree.
- a split's weight was never restored, because the edit meant to read it
silently matched nothing and was never applied.
- `active=true` landed on the wrong tab: the index is recorded while the new
tabs sit after the old ones, and `replace` then moves them to the front.
Which is why the test asserts that a dump of a reload is byte-identical to
the first dump. Anything the dumper loses shows up there at once, where
reading it and nodding would not.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Two things wrong with the first one, and both are about it being a modal
rather than a pane that happens to float.
The close button was invisible. It was drawn in the pane button colour on the
finder background, and in the default theme those are the same value --
#45454a on #45454a -- so it only appeared when the pointer landed on it and
the hover colour took over. That is the hazard of borrowing names from
another surface: each one is right, and together they are nothing. A modal is
its own surface now, with its own names (modal_bg, modal_fg, modal_border,
modal_title, modal_button, modal_button_hover), a dark panel a shade lighter
than the dimmed screen, a border in the accent, and a button chosen to be
visible *without* the pointer on it. All six themes set them.
And nothing behind it moved, so it read as another pane rather than as
something in front. There is a scrim now, `modal_scrim` (0..255, 120 by
default), and the pleasing part is that it is not a new mechanism: it is the
shader pass aimed at the screen instead of at a pane. Same dim, same
materialisation of default colours, no special case. It goes down after
everything else is painted and before the modal, so the modal is the only
thing at full brightness -- which is the whole idea, and is asserted rather
than assumed.
The shape is now reusable: modal_frame() draws the box, title, close button
and hit, and returns the rect inside it; draw_scrim() is one line above it.
The next modal is a function call and looks the same as this one.
The finder is deliberately left alone. It is a picker rather than a modal --
it navigates, where a modal here dismisses on any key -- so unifying them
would be making two things one because they are both rectangles.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
They only existed in a browser, which is a strange place for a terminal
multiplexer's shaders to live. Now each one is a file you can paste.
contrib/shaders/ holds all thirty-two, one per file, *generated* from the
presets in shadertoy.html by contrib/gen-shaders. The page stays the source:
it is where they are written, previewed and conformance-tested against the
compiler, and a hand-kept second copy would drift the day after it was
written. `gen-shaders --check` says whether the files are current, which is a
test, so the drift is a failing build rather than a stale example.
contrib/shader-tour cycles a session through them, in the shape theme-tour
already established — write the config the session watches and let the
watcher do the rest. It takes one shader, one group, or nothing for all of
them, and it resolves a short name (`torch`) as well as the whole slug
(`guides-torch`), because nobody remembers which group a shader is in. The
tour writes the theme alongside the shader: shaders resolve default-coloured
text through theme's default_fg/default_bg, so a preset judged without one is
being judged against a guess.
The new test is the one that matters. Every shipped file is loaded into a
real session and has to *change the cells of a pane* -- an example that
previews beautifully and does nothing when pasted is worse than no example,
and neither the toy's conformance test nor a config parse would notice. Three
of them are then checked for the specific thing they claim: scanlines
alternate row by row, indent guides land on every fourth column, a flat dim
is flat. One session, reloaded per preset, which is both quick and a fair
exercise of the path anyone will actually use.
Renamed the "the built-ins, as expressions" group to drop the qualifier from
its filenames; it was generating built-ins-as-expressions-scanlines.kdl,
which is a sentence rather than a name.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Eleven examples, grouped, and most of them are less "effect" than
*instrument*: a cursor line, a crosshair, indent guides, a right margin at
three quarters, a torch that dims everything more than eight cells from where
you are looking. Things that tell you where you are, inside a program that
has never heard of any of them -- which is the argument for shading contents
rather than chrome, made in examples instead of prose.
Then the fun: phosphor and amber CRTs (grayscale, tint, scanlines, vignette
as a four-pass chain), film grain, a rolling bar, an interlace flicker; sonar
pings expanding from the cursor, ripples, a barber pole, plasma from two
triangle waves, matrix rain with a fading tail; and every built-in written as
an expression, because `vignette` being `dim` with an argument is the whole
design and is better shown than argued.
Two rules the presets follow, both about staying identical to the C: never
multiply `t` (it is a millisecond clock and gets large -- divide it down
first and the arithmetic stays in an int32 forever), and keep hash
coefficients small for the same reason. `(x * 11) % 23` is fine; the usual
Knuth constant is a different number in C than in JavaScript.
The test now lifts the *presets* out of the page as well as the evaluator, so
one added later is conformance-checked without anyone remembering to add it.
And it evaluates every preset over a whole pane at four points in time and
fails any that is zero everywhere -- an example that does nothing reads as a
broken shader system rather than a bad example.
That check caught its own first draft: sampling every other row made three
`y % 2` effects look dead when they were fine. It samples every cell now,
which costs six hundredths of a second for four hundred thousand
evaluations, because the thing being tested is quick.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The canvas was 576x432 with `max-width: 100%`, so a wide pane stretched a
576-pixel preview across it and `image-rendering: pixelated` made sure you
could see every one of those pixels doing it. A preview of a terminal that
does not look like a terminal is not much of a preview.
Two sizes now, deliberately: the backing store is device pixels (DPR, capped
at 3) so glyphs stay sharp on a HiDPI screen, and the CSS size is pinned to
the real 576x432 so nothing ever scales it up. A viewport with room to spare
gets space around the preview instead of a blur; one that is genuinely too
small still shrinks it, smoothly, which is the direction where scaling is
fine.
Checked by rendering a frame against a stub canvas under node: the draw path
covers exactly the CSS box while the backing store is twice that at DPR 2.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
You cannot see an expression by reading it. `(y % 2) * 40` is scanlines and
`(x > cols - 10) * 120` is a right margin, and neither is obvious until it is
on a screen -- so here is a screen. One HTML file, no build and no server:
open it and it works, offline, including from a checkout on a machine that
has never run sl0ppty.
It draws a fake pane with plausible contents, applies a chain of passes to
every cell, and prints the config line to paste. The mouse moves the cursor,
so `dist(x, y, curx, cury)` behaves the way it will in a pane rather than the
way it does at coordinates you imagined. Anything reading `t` animates. The
presets are every built-in written as an expression, which is the equivalence
the whole design rests on: `vignette` and `spotlight` are not special, they
are `dim` with an argument.
It also reports what each expression *reads* and whether that makes it
cacheable, because the dependency analysis is the interesting half of the
implementation and is otherwise invisible.
The hazard is that this is a second implementation of the language, in
another language, and it would disagree with the compiler quietly -- in the
third digit of a colour, on one preset, at one cursor position. So
tests/test_shadertoy.py lifts the evaluator straight out of the page (not a
copy of it, the page itself) and runs a few hundred expression/environment
pairs through both it and src/expr.c, including the corners: division by
zero, the ternary's untaken branch, `dist` counting a row double, and six
expressions that both sides must refuse. build/expr_eval is the real compiler
as a filter, which is what makes that comparison possible at all.
It found a bug on its first run, in the page: unary `-` and `!` did not
thread the environment through their closures, so `!x` threw instead of
evaluating. Which is the argument for the test, made better than I could have
made it.
Skipped with a message when node is missing -- a checker for a contrib toy is
not a reason the suite cannot run.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Adding an effect meant writing C -- in the binary, or since D15 in a shared
library. Both are a lot of ceremony for "dim every other row".
So: `amount` may be an expression, compiled to bytecode when the config is
read and evaluated per cell.
shaders {
dim amount="(y % 2) * 40" // scanlines
dim amount="(x > cols - 10) * 120" // a right margin
tint amount="255 - dist(x, y, curx, cury) * 12" color="#ff5fd7"
}
The scope is the argument, and that is the whole design. Every built-in here
is already colour_op(amount) with the amount a pure function of position --
vignette, zebra, ruler, margin and spotlight differ only in that function --
so the part worth handing to a config is the *number*, not the colour maths.
Three things follow at once: the mixing stays in C where it is fast and
correct; an expression cannot produce an invalid cell, because it produces
one byte; and that byte is cacheable.
The cache is what makes an interpreter affordable, and the numbers are why
this exists at all. Measured on a 200x50 pane, one pass:
native vignette 6.1 ns/cell
constant expression, folded 5.6 ns/cell
positional expression, mapped 5.2 ns/cell
animated (reads the clock) 35.0 ns/cell
A shader you wrote in your config costs what a compiled one does. A program
that does not read the clock is evaluated once per cell into a byte map and
reused until something it reads changes; one that does read the clock is
interpreted per cell, per frame, which is the honest price of animation and
is opt-in. (The earlier measurement of 56ns for interpretation was per
evaluation -- correct, and the reason the map exists rather than an argument
against the language.)
What a program reads is derived by the compiler rather than declared, and
that dependency set *is* the cache key. A stale map is therefore
unrepresentable rather than merely unlikely -- the same rule the layout
follows, arrived at from the other direction. A unit test caught the first
violation of it before anything else did: `cols` and `rows` carried no
dependency flag, on the theory that the key always contains the rect, and so
a program reading only the size looked constant and was folded at compile
time, where every size is zero.
The language is deliberately total. No loops, no recursion, no jumps: even
`?:` compiles to evaluating both sides and selecting, because nothing in it
has an effect. Evaluation is O(program length), so a config cannot spin, and
there is nothing to sandbox. Division by zero is 0 rather than a trap: an
expression that is wrong should look wrong, not take the session with it. One
that does not compile drops that one shader with a warning -- not the config,
and not the half-strength version of what you asked for, which is what the
number path did with garbage and is now also fixed.
shader_t gained the compiled program, so the plugin ABI goes to 2. A plugin
built against 1 is refused with "shader ABI 1, we speak 2" and needs nothing
but a rebuild -- the check earning its keep the first time it was asked to.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Adding an effect meant editing shader.c and rebuilding, which is fine for us
and useless to anyone else. Now any `*.so` in the shader directory that
exports a plugin table is loaded at startup, and what it declares is named in
the config exactly like a built-in -- same syntax, same three parameters,
same pass. Default location is a `shaders` directory beside the config file,
so dropping the .so next to config.kdl is the whole installation.
The interesting part is what a plugin can see, which is one header.
shader_abi.h holds cell_t, color_t, shade_ctx_t, shader_t and nothing else:
no libghostty-vt, no pty, no layout, no session. A shader is therefore
unable to reach anything but the cell it was handed, not by rule but because
nothing else is declared where it can find it. cell_t and color_t moved
there from sl0ppty.h for the same reason -- that is the one place they are a
contract with code compiled outside this tree rather than an internal type.
Loading is deliberately narrow:
- refused unless the library reports our ABI version *and* matching struct
sizes. The version says which contract; the sizes catch someone editing
their copy of the header, which a version number alone calls fine and a
running session calls garbled colours;
- refused if it redefines an existing name, because a config naming `dim`
means the `dim` it was written against;
- all-or-nothing per file, and per file: a bad library is a line on stderr
and everything else still loads (D9 fail-open);
- nothing is ever unloaded. A shade_fn may be sitting in a live config or on
a pane, so dlclose() is a jump into an unmapped page. A reload picks up
newly *added* plugins; replacing one needs a new session.
This is the single exception to D9's "a plugin is a subprocess", and it is
argued in D15 rather than drifted into: a shader is called per cell, per
pass, per frame, which no subprocess can be in the path of, and the measured
alternative -- interpreting bytecode per cell -- is 56ns against 8ns for the
compiled function. On trust, `shell` and a layout's `command=` already let a
file in the config directory run anything as you, so a .so beside them is
not a new boundary. The docs say so plainly rather than implying a sandbox.
contrib/shader-plugin is a working skeleton: Makefile, two commented effects
(one positional, one animated), and the three rules a shader has to keep. It
is built and loaded by the test suite, so a broken example is a failing test
rather than someone else's afternoon.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A pane whose program exited was reaped before the next paint. The pane went,
and with it everything the program had printed -- including, always, the one
line that would have explained why it stopped. Close the last one and the
session went too, so a mistyped command in a fresh session closed the
terminal you were typing in.
Now the pane stays. It keeps its contents, writes one line into its own
backlog saying how it ended -- `[process exited: status 3]`, `signal 9` --
says the same thing in its frame and in the status line, and offers the two
verbs that still mean anything:
╰ exited: status 3 ──────────────────────────────[re-run]─[close]─╯
`[re-run]` runs the same argv in the same cwd in the *same pane*: same id,
same node in the tree, same terminal. Nothing that referred to that pane has
to be told anything, and the run that ended stays above the new one in the
scrollback, which is what makes comparing two runs possible at all. C-a r
and {"cmd":"rerun"} do the same thing; a live pane is refused rather than
restarted, because "run it again" is not a request to kill something.
Those buttons are the OSC 5577 row, not a second mechanism. A dead pane's
own buttons are inert -- a click would write a report into a closed pty --
so the row is given over rather than added to. `close` is listed last, so it
is drawn rightmost and is the one that survives a narrow frame: being unable
to dismiss a dead pane is a trap, being unable to re-run one is an
inconvenience.
`dead` is a shader state now, which D13 said it could never be: it named a
frame that could not be drawn, and now there is one. Dead panes drain to
grey by default, so a wall of them reads at a glance. A collapsed header
says "exited" in words as well, because the shader pass does not reach one
and a flattened tab draws nothing else of a pane.
Two things about this are load-bearing rather than incidental:
- the pty fd is closed the moment EOF is seen. A pane that outlives its
program stays in the poll set, and an fd at EOF is readable forever: the
session would spin a core behind a pane that looks idle.
- the exit status is collected with a bounded wait, never a blocking one.
EOF means the program already closed its fds, so it is on its way out and
a few hundred microseconds wins that race. A blocking waitpid would hang
the whole session on one program that closes its terminal and keeps
running; losing the race costs the words "status 0" and nothing else.
`keep_dead false` restores the old behaviour for a one-shot layout that
wants it. `panes` reports alive/exit_code/exit_signal, so a script can find
the pane whose command failed and rerun it.
|
|
|
Six themes, each setting every colour the config knows about. A theme that has
fallen behind silently keeps the compiled-in default for whatever it forgot,
which looks like a bug in the theme rather than a missing line in it, so a test
compares each file against the names config.c actually parses.
contrib/theme-tour applies one to a running session, or cycles the lot. It does
that by writing over the file the session was started with and letting the
config watcher notice, which makes the showcase a demonstration of the watcher
as well.
HANDOVER.md is for the next context. It deliberately does not restate DESIGN.md
or the README; it is the part that was only learnable by getting it wrong —
which state is derived and which is intent and what happens when you confuse
them, the dwell repaint list, that glyph width and glyph weight are different
problems, that settle() in the harness is a sleep in disguise, and that a test
pinned to a coordinate it does not care about will eventually look like a
regression it is not.
|