|
|
The control register carries an identifier in four bits, so there are sixteen possible
commands, eleven named in the headers and five undocumented, of which only ring-create and
destroy had ever been used. This is a command space distinct from both the ring command
space and the application command space and it had never been enumerated.
With one identifier per fresh boot and each run passing its own control first, every one of
the fourteen tested identifiers leaves the processor able to create a ring and run a
command. The two excluded are the destroy command the driver uses normally and the reset
command that resets the chip by design.
The interrupt-ring setter deserved attention since it points the processor at a
host-supplied ring, the same shape as the unvalidated fence destination, but writing it
changes nothing observable, so on this firmware it needs parameters this path does not
supply.
This is the only structure in the ring family with no defect, the frame having two
unvalidated fields and creation an alignment gap, and it exhausts that family.
|