diff options
Diffstat (limited to 'idatui')
| -rw-r--r-- | idatui/app.py | 174 | ||||
| -rw-r--r-- | idatui/drive.py | 10 | ||||
| -rw-r--r-- | idatui/edit_ctl.py | 2 | ||||
| -rw-r--r-- | idatui/rpc.py | 46 | ||||
| -rw-r--r-- | idatui/trace_ctl.py | 4 |
5 files changed, 150 insertions, 86 deletions
diff --git a/idatui/app.py b/idatui/app.py index c66e39a..61f366e 100644 --- a/idatui/app.py +++ b/idatui/app.py @@ -22,6 +22,7 @@ import re import subprocess import time from dataclasses import dataclass, field +from enum import StrEnum from rich.align import Align from rich.segment import Segment @@ -89,6 +90,42 @@ _OP_LIMIT = 8 # opcode bytes shown in the 'limited' column mode _JUMP_CONTEXT = 4 # lines of context kept above a jump target (cursor stays on it) _SPLIT_MIN_WIDTH = 100 # need room for two usable code panes side by side + +class ViewMode(StrEnum): + """Which pane is showing (in split: which one has focus). ``IdaTui._active``. + + A ``StrEnum`` rather than an enum, deliberately: ``_active`` is handed + straight to drivers as ``cursor.kind`` over the RPC socket, and the pilot + suite compares it to plain strings. Members ARE strings, so every existing + comparison and every JSON payload keeps working -- what this buys is one + place that says which modes exist, and an AttributeError instead of silence + when one is misspelled. + + There used to be a fifth value, ``"disasm"``, assigned on exactly one path + (a decompile that failed with nowhere to return to) and meaning the same + widget as ``LISTING``. Four sites handled it and five compared against + ``"listing"`` alone, so it silently took the wrong branch in half the app -- + Tab out of a failed decompile flipped to the listing instead of retrying the + decompiler, and rpc.py carried a workaround for a mode change that never + arrived. It is gone; the failure path lands on LISTING like every other + route into the listing. + + Adding a mode means auditing every ``_active`` comparison. Prefer the + predicates on IdaTui (``is_listing``/``in_code``/...) over bare ``==`` so + the next one has fewer places to reach. + """ + + LISTING = "listing" # the unified continuous listing (code + data) + DECOMP = "decomp" # Hex-Rays pseudocode + HEX = "hex" # the hex viewer + GRAPH = "graph" # the CFG graph view + + #: The two that show a code view over a NavEntry, i.e. where a follow, an + #: xref or a rename makes sense. + @classmethod + def code_modes(cls) -> frozenset["ViewMode"]: + return frozenset({cls.LISTING, cls.DECOMP, cls.GRAPH}) + # Tokens that look like identifiers but aren't renamable symbols (so 'n' on them # in the listing names the address instead of trying to rename the token). _ASM_KEYWORDS = frozenset({ @@ -144,7 +181,7 @@ class BinaryState: func_index: object | None = None nav: list = field(default_factory=list) cur: object | None = None - active: str = "listing" + active: ViewMode = ViewMode.LISTING split: bool = False filter_term: str = "" dirty: bool = False @@ -4489,7 +4526,7 @@ class IdaTui(App): # ONE notion of "which pane you're in": _active, kept in step with focus # (on_descendant_focus does that while split). There used to be a second, # _pref, but it was only ever assigned "listing" — see _code_mode(). - self._active = "listing" # currently shown view (in split: the focused pane) + self._active = ViewMode.LISTING # currently shown view (in split: the focused pane) self._split = False # side-by-side listing + pseudocode self._graph_sticky = False # stay in graph mode across navigations self._split_eamap: list[list[int]] = [] # split: decomp line -> instr EAs @@ -5424,7 +5461,7 @@ class IdaTui(App): self._pool.set_active(label) self._open_path = self._project.by_label(label).staged self._title = os.path.basename(self._open_path) - self._active = st.active if st else "listing" + self._active = st.active if st else ViewMode.LISTING self._split = st.split if st else False self._filter_term = st.filter_term if st else "" self._dirty = st.dirty if st else False @@ -5542,24 +5579,24 @@ class IdaTui(App): return if self._split: # In split mode Tab/F5 just moves focus between the two panes. - self._active = "decomp" if self._active == "listing" else "listing" - (self.query_one(DecompView) if self._active == "decomp" + self._active = ViewMode.DECOMP if self.is_listing else ViewMode.LISTING + (self.query_one(DecompView) if self.is_decomp else self.query_one(ListingView)).focus() self._sync_split(self._active) # re-link from the new driver self._status_for_cur("split") return - if self._active == "hex": + if self.is_hex: self._active = self._code_mode() self._show_active() return - if self._active == "graph": + if self.is_graph: # F5/Tab out of the graph lands in the pseudocode at the block the # cursor was on (Space is the key that returns to the listing). gv = self.query_one(GraphView) ea = gv._cursor_ea() self._graph_sticky = False if ea is None: - self._active = "listing" + self._active = ViewMode.LISTING self._show_active() return gv.display = False @@ -5570,7 +5607,7 @@ class IdaTui(App): self._status("decompiling…") self._decomp_from_listing(ea) return - if self._active == "listing": + if self.is_listing: # F5/Tab in the continuous listing: decompile the function under the # cursor (IDA-style), if the cursor is inside a defined routine. ea = self.query_one(ListingView)._cursor_ea() @@ -5595,7 +5632,7 @@ class IdaTui(App): self._decomp_return = None if ret is not None: self._cur = ret - self._active = "listing" + self._active = ViewMode.LISTING self._open_entry(ret, push=False) elif self._cur is not None: # No F5 snapshot (we arrived via a decomp navigation): show THIS entry @@ -5606,7 +5643,7 @@ class IdaTui(App): ea = dec._line_ea(dec.cursor) self._toggle_to_listing(ea if ea is not None else self._cur.ea) else: - self._active = "listing" + self._active = ViewMode.LISTING self._show_active() @work(thread=True, group="nav") @@ -5619,14 +5656,14 @@ class IdaTui(App): def _apply_toggle_listing(self, idx: int) -> None: cur = self._cur if cur is None: - self._active = "listing" + self._active = ViewMode.LISTING self._show_active() return cur.view = "listing" cur.cursor = idx cur.cursor_x = 0 cur.scroll_y = -1 # derive a viewport (keeps the target in context) - self._active = "listing" + self._active = ViewMode.LISTING self._open_entry(cur, push=False) @work(thread=True, group="nav") @@ -5645,7 +5682,7 @@ class IdaTui(App): # We optimistically raised the pseudocode overlay; drop back to the # listing since there's nothing to decompile here. self.query_one(DecompView).loading = False - self._active = "listing" + self._active = ViewMode.LISTING self._show_active() self._status(msg) @@ -5661,7 +5698,7 @@ class IdaTui(App): entry = NavEntry(ea=fn_addr, name=fn_name, is_region=False, dec_cursor=max(dec_idx, 0)) self._cur = entry - self._active = "decomp" + self._active = ViewMode.DECOMP self._show_active() def action_toggle_split(self) -> None: @@ -5677,7 +5714,7 @@ class IdaTui(App): return self._split = not self._split if self._active not in ("listing", "decomp"): - self._active = "listing" + self._active = ViewMode.LISTING if self._split: self._enter_split(self._cur.ea, self._cur.name) else: @@ -5692,7 +5729,7 @@ class IdaTui(App): """Space: swap the code view for the function's control-flow graph.""" if self._prompt_active(): return - if self._active == "graph": + if self.is_graph: self._graph_sticky = False self._active = self._code_mode() self._show_active() @@ -5705,7 +5742,7 @@ class IdaTui(App): ea = self._graph_target_ea() if gv.loaded_ea is not None and gv.fc is not None \ and gv.fc.func_ea == self._cur.ea: - self._active = "graph" + self._active = ViewMode.GRAPH self._split = False self._show_active() if ea is not None: @@ -5719,9 +5756,9 @@ class IdaTui(App): """The address the graph should land on: wherever the code view's cursor is, so Space doesn't lose your place.""" try: - if self._active in ("listing", "disasm"): + if self.is_listing: return self.query_one(ListingView)._cursor_ea() - if self._active == "decomp": + if self.is_decomp: dv = self.query_one(DecompView) return dv._line_ea(dv.cursor) except Exception: # noqa: BLE001 @@ -5745,7 +5782,7 @@ class IdaTui(App): err: str) -> None: if self._cur is None or self._cur.ea != func_ea: return # a newer navigation won - if not self._graph_sticky and self._active != "graph": + if not self._graph_sticky and not self.is_graph: # The load lost its race: the user has since left graph mode (or a # rename's reload queued one behind their back). Forcing the view # here drags them back into a graph they already dismissed. @@ -5761,7 +5798,7 @@ class IdaTui(App): return gv = self.query_one(GraphView) gv.set_graph(fc, want_ea) - self._active = "graph" + self._active = ViewMode.GRAPH self._split = False self._show_active() self._graph_status() @@ -5808,19 +5845,19 @@ class IdaTui(App): cursor; press again (or Tab/Esc) to return to the code view.""" if self._cur is None or self.program is None: return - if self._active == "hex": + if self.is_hex: self._active = self._code_mode() self._show_active() return - if self._active in ("listing", "disasm"): + if self.is_listing: ea = self.query_one(ListingView)._cursor_ea() - elif self._active == "graph": + elif self.is_graph: ea = self.query_one(GraphView)._cursor_ea() else: dec = self.query_one(DecompView) ea = dec._line_ea(dec.cursor) self._hex_pending_ea = ea if ea is not None else self._cur.ea - self._active = "hex" + self._active = ViewMode.HEX self._show_active() def action_filter(self) -> None: @@ -5833,7 +5870,7 @@ class IdaTui(App): def action_goto(self) -> None: inp = self.query_one("#goto", Input) - inp.placeholder = ("hex goto: 0xADDR or name — Enter" if self._active == "hex" + inp.placeholder = ("hex goto: 0xADDR or name — Enter" if self.is_hex else "goto: name or 0xADDR — Enter") inp.can_focus = True inp.display = True @@ -6256,7 +6293,7 @@ class IdaTui(App): # If xrefs was invoked from the decompiler, land the jump back in the # decompiler (when the target is decompilable) rather than the listing. self._goto_ea(addr, push=True, focus_name=self._xref_focus_name, - prefer_decomp=(self._active == "decomp")) + prefer_decomp=(self.is_decomp)) # -- database edits ---------------------------------------------------- # # The bodies live in EditController (idatui/edit_ctl.py). What stays here is @@ -6493,7 +6530,7 @@ class IdaTui(App): # Snapshot where we jumped from so 'back' returns there. If that was # the pseudocode (F5 makes a transient _cur not yet on the stack), # record its position and push it as a decomp entry. - if self._active == "decomp" and self._cur is not None: + if self.is_decomp and self._cur is not None: dv = self.query_one(DecompView) src = self._cur src.view = "decomp" @@ -6720,7 +6757,7 @@ class IdaTui(App): self._end_search(cancel=True) elif prompt.id == "goto": self._end_goto() - (self.query_one(HexView) if self._active == "hex" + (self.query_one(HexView) if self.is_hex else (self._code_view() or self.query_one(ListingView))).focus() else: prompt.close() @@ -6762,7 +6799,7 @@ class IdaTui(App): return if inp.id == "goto": self._end_goto() - (self.query_one(HexView) if self._active == "hex" + (self.query_one(HexView) if self.is_hex else (self._code_view() or self.query_one(ListingView))).focus() if value: self._goto(value) @@ -6791,6 +6828,30 @@ class IdaTui(App): return view._line_ea(view.cursor) return None + # Read _active through these rather than comparing strings. The bare + # comparisons are what let the old "disasm" value take the wrong branch in + # five places, and they are what the next new mode would have to hunt down. + @property + def is_listing(self) -> bool: + return self._active == ViewMode.LISTING + + @property + def is_decomp(self) -> bool: + return self._active == ViewMode.DECOMP + + @property + def is_hex(self) -> bool: + return self._active == ViewMode.HEX + + @property + def is_graph(self) -> bool: + return self._active == ViewMode.GRAPH + + @property + def in_code(self) -> bool: + """A code view over a NavEntry -- where follow/xrefs/rename mean something.""" + return self._active in ViewMode.code_modes() + def _active_code_view(self): # type: ignore[no-untyped-def] """The currently-shown code widget (for reading the cursor address). @@ -6799,11 +6860,11 @@ class IdaTui(App): dereferences it crashes the app (which is exactly how graph mode announced itself the first time it was driven). """ - if self._active in ("listing", "disasm"): + if self.is_listing: return self.query_one(ListingView) - if self._active == "decomp": + if self.is_decomp: return self.query_one(DecompView) - if self._active == "graph": + if self.is_graph: return self.query_one(GraphView) return None @@ -6859,12 +6920,12 @@ class IdaTui(App): except Exception as e: # noqa: BLE001 self.app.call_from_thread(self._status, f"goto: {e}") return - if self._active == "hex": + if self.is_hex: self.app.call_from_thread(self._hex_goto, ea) return # A goto that lands inside the graph you're already looking at should # move the cursor, not tear the picture down and build the same one. - if self._active == "graph": + if self.is_graph: gv = self.query_one(GraphView) if gv.fc is not None and gv.fc.block_at(ea) is not None: self.app.call_from_thread(gv.goto_ea, ea) @@ -6911,9 +6972,9 @@ class IdaTui(App): self._do_navigate(ea, push) - def _code_mode(self) -> str: + def _code_mode(self) -> ViewMode: """The code view to return to from hex — always the unified listing.""" - return "listing" + return ViewMode.LISTING def _open_entry(self, entry: NavEntry, push: bool) -> None: if self.program is None: @@ -6924,7 +6985,7 @@ class IdaTui(App): if entry.view == "decomp": # This entry was viewed in the decompiler (a jump from pseudocode, or # a back/forward to one) — restore it there instead of the listing. - self._active = "decomp" + self._active = ViewMode.DECOMP dec = self.query_one(DecompView) if dec.loaded_ea == entry.ea: # already decompiled: reposition without a recompile @@ -6953,7 +7014,7 @@ class IdaTui(App): lst.load( lm, entry.name, cursor=entry.cursor, cursor_x=entry.cursor_x, scroll_y=sy, focus=focus) - self._active = "listing" + self._active = ViewMode.LISTING self._show_active() # Graph mode is sticky: following a call from the graph should land in # the callee's graph, not dump you back into the listing. The rebuild is @@ -6983,7 +7044,7 @@ class IdaTui(App): # Don't steal focus from an open prompt (search/rename/…) — a late async # navigation completing here would otherwise pull it into the code view. grab = not self._prompt_active() - if self._split and self._active in ("listing", "decomp"): + if self._split and self._active in (ViewMode.LISTING, ViewMode.DECOMP): # Side-by-side: listing (left) + pseudocode (right), one focused. hx.display = gv.display = False lst.display = dec.display = True @@ -6995,7 +7056,7 @@ class IdaTui(App): else: dec.loading = False if grab: - (dec if self._active == "decomp" else lst).focus() + (dec if self.is_decomp else lst).focus() if busy and self._cur is not None: # Keep the in-flight message: the idle status used to overwrite # it, so travelling history in split showed nothing at all while @@ -7012,18 +7073,18 @@ class IdaTui(App): self._split_ea2line = {} self._split_range = None dec.display = lst.display = hx.display = gv.display = False - if self._active == "graph": + if self.is_graph: gv.display = True if grab: gv.focus() self._graph_status() return - if self._active in ("listing", "disasm"): + if self.is_listing: lst.display = True if grab: lst.focus() self._status_for_cur("listing") - elif self._active == "hex": + elif self.is_hex: hx.display = True if grab: hx.focus() @@ -7064,7 +7125,7 @@ class IdaTui(App): self._status("hex: no loaded segments") return hx.load(model, ea) - if self._active == "hex": + if self.is_hex: hx.focus() def _hex_status(self, va: int) -> None: @@ -7117,14 +7178,14 @@ class IdaTui(App): detail = f" \u2014 {why}" if why else "" # No pseudocode for this function: fall back to the code view rather # than an error panel. If we came from the continuous listing (F5), - # return there; otherwise show the disassembly. + # return to exactly where we left; otherwise just show the listing. if self._cur is None or self._cur.ea != ea: return # navigated away; stale result if self._decomp_return is not None: ret = self._decomp_return self._decomp_return = None self._cur = ret - self._active = "listing" + self._active = ViewMode.LISTING # Hand the reason over as a flash BEFORE reopening: going back # to the listing reloads it, and the reload writes its own # status afterwards — which is precisely how "F5 does nothing" @@ -7133,11 +7194,14 @@ class IdaTui(App): self._status(msg, priority=True) self._open_entry(ret, push=False) return - self._active = "disasm" + # LISTING, not the old "disasm": it is the same widget, and a value + # only this path produced meant half the app took the wrong branch + # for it (see ViewMode). + self._active = ViewMode.LISTING self._status(f"{name}: cannot decompile{detail}", priority=True) self._show_active() return - if self._active == "decomp": + if self.is_decomp: view.focus() # loading cover had blurred it; restore focus # Restore the saved pseudocode position when returning to this function. cur = self._cur @@ -7231,11 +7295,11 @@ class IdaTui(App): return top, 0 def on_listing_view_scrolled(self, msg: "ListingView.Scrolled") -> None: - if self._split and self._active == "listing": + if self._split and self.is_listing: self._sync_split("listing") def on_decomp_view_scrolled(self, msg: "DecompView.Scrolled") -> None: - if self._split and self._active == "decomp": + if self._split and self.is_decomp: self._sync_split("decomp") @work(thread=True, group="split-resync", exclusive=True) @@ -7267,7 +7331,7 @@ class IdaTui(App): """A split-aware status line reflecting the focused pane + the link.""" if self._cur is None: return - if self._active == "decomp": + if self.is_decomp: dec = self.query_one(DecompView) ea = dec._line_ea(dec.cursor) n = (len(self._split_eamap[dec.cursor]) @@ -7340,7 +7404,7 @@ class IdaTui(App): self._nav[-1].dec_cursor = msg.index self._nav[-1].dec_cursor_x = dv.cursor_x if self._split: - if self._active == "decomp": + if self.is_decomp: self._sync_split("decomp") self._split_status() return @@ -7366,7 +7430,7 @@ class IdaTui(App): if msg.index >= 0: self._nav[-1].scroll_y = round(lst.scroll_offset.y) if self._split: - if self._active == "listing": + if self.is_listing: self._sync_split("listing") self._split_status() return diff --git a/idatui/drive.py b/idatui/drive.py index b83a8ba..1c7d8c2 100644 --- a/idatui/drive.py +++ b/idatui/drive.py @@ -64,7 +64,7 @@ def _fmt_where(st: dict) -> str: ea = fn.get("ea") loc = f"{name} @ {ea:#x}" if isinstance(ea, int) else "(none)" extra = "" - if cur.get("kind") in ("decomp", "disasm"): + if cur.get("kind") in ("decomp", "listing"): extra = f" L{cur.get('line')} C{cur.get('col')} word={cur.get('word')!r}" elif cur.get("kind") == "hex": extra = f" va={cur.get('va'):#x}" if isinstance(cur.get("va"), int) else "" @@ -87,10 +87,10 @@ def cmd_go(c, args): def _show_view(c, want): """Make the requested code pane the visibly-active view (best effort). - Tab toggles disasm<->decomp, and leaves hex back to the preferred code + Tab toggles listing<->decomp, and leaves hex back to the preferred code view; so at most two toggles reach either code view from any state. If - the decompiler fails for the current function the view falls back to - disasm and we simply stop — the caller still returns its text as before. + the decompiler fails for the current function the view falls back to the + listing and we simply stop — the caller still returns its text as before. """ for _ in range(2): if c.call("state").get("active") == want: @@ -132,7 +132,7 @@ def cmd_dis(c, args): # Drive the real UI so viewers see the disassembly, not just the driver. if target is not None: c.call("goto", target=target, delay_ms=0) - _show_view(c, "disasm") + _show_view(c, "listing") d = c.call("disassembly", target=target, max=n) return "\n".join(f"{ln['ea']:#010x} {ln['text']}" for ln in d.get("lines", [])) diff --git a/idatui/edit_ctl.py b/idatui/edit_ctl.py index 7364130..7803a7a 100644 --- a/idatui/edit_ctl.py +++ b/idatui/edit_ctl.py @@ -64,7 +64,7 @@ class EditController: cur = app._cur if cur is None: return - if app._active == "decomp": + if app.is_decomp: # Snapshot the LIVE pseudocode position before forcing a recompile. # dec_scroll_y isn't tracked on every move, so without this the reload # falls into show()'s derive path (a bare scroll_to) and leaves a diff --git a/idatui/rpc.py b/idatui/rpc.py index 90cfd3c..b4ca80e 100644 --- a/idatui/rpc.py +++ b/idatui/rpc.py @@ -28,7 +28,7 @@ from typing import Any from rich.console import Console from ._sync import drain, settle -from .app import DecompView, GraphView, HexView, ListingView +from .app import DecompView, GraphView, HexView, ListingView, ViewMode PROTO_VERSION = 1 TYPE_DELAY_MS = 35 # default per-char delay for high-level typed ops (aesthetic) @@ -128,11 +128,11 @@ _MOVE_KEYS = { # --------------------------------------------------------------------------- # def _active_widget(app): """The currently *shown* code widget (mirrors app._active).""" - if app._active == "hex": + if app.is_hex: return app.query_one(HexView) - if app._active == "graph": + if app.is_graph: return app.query_one(GraphView) - if app._active in ("listing", "disasm"): + if app.is_listing: return app.query_one(ListingView) return app.query_one(DecompView) @@ -142,11 +142,11 @@ def graph_info(app, blocks: bool = True) -> dict[str, Any]: rather than the box-drawing characters it is rendered as.""" gv = app.query_one(GraphView) if gv.fc is None or gv.lay is None: - return {"open": app._active == "graph", "loaded": False, + return {"open": app.is_graph, "loaded": False, "note": "press space (or graph {action:'open'}) on a function"} lay, fc = gv.lay, gv.fc out: dict[str, Any] = { - "open": app._active == "graph", + "open": app.is_graph, "loaded": True, "func": {"name": fc.name, "ea": fc.func_ea, "entry": fc.entry}, "zoom": gv.ZOOMS[gv._zoom], @@ -631,20 +631,20 @@ class RpcServer: if action == "show": return {**snapshot(app), "graph": graph_info(app, blocks=want_blocks)} if action in ("open", "toggle", "close"): - if action == "open" and app._active == "graph": + if action == "open" and app.is_graph: return {**snapshot(app), "graph": graph_info(app, blocks=want_blocks)} - if action == "close" and app._active != "graph": + if action == "close" and not app.is_graph: return {**snapshot(app), "graph": graph_info(app, blocks=want_blocks)} want = "graph" if action in ("open", "toggle") and \ - app._active != "graph" else None + not app.is_graph else None res = await self._press( ["space"], - (lambda: app._active == "graph") if want else - (lambda: app._active != "graph"), + (lambda: app.is_graph) if want else + (lambda: not app.is_graph), timeout, f"graph {action}") return {**res, "graph": graph_info(app, blocks=want_blocks)} - if app._active != "graph": + if not app.is_graph: raise ValueError(f"graph {action}: the graph is not open " f"(graph {{action:'open'}} first)") if action == "zoom": @@ -795,7 +795,7 @@ class RpcServer: ea = app.program.resolve(target) except Exception: # noqa: BLE001 — unknown name; caller falls back to generic return None - if app._active == "hex": + if app.is_hex: return lambda: app.query_one(HexView).cursor_va() == ea fn = app.program.function_of(ea) want = fn.addr if fn else ea @@ -1025,17 +1025,17 @@ class RpcServer: await self._fill_prompt("g", "goto", str(target), delay, clear=False) await settle(app, timeout=timeout) - if app._active == "hex": + if app.is_hex: # backslash leaves hex for the code view (which may be decomp). await self._press(["backslash"], - lambda: app._active != "hex", timeout, + lambda: not app.is_hex, timeout, "leave the hex view") - if app._active == "decomp": + if app.is_decomp: # These bindings live on the listing; in the decompiler the key # would be swallowed or do something else entirely. - await self._press(["tab"], lambda: app._active == "listing", + await self._press(["tab"], lambda: app.is_listing, timeout, "switch to the listing") - if app._active != "listing": + if not app.is_listing: raise RuntimeError( f"define needs the listing view, but the active pane is " f"{app._active!r}") @@ -1054,8 +1054,8 @@ class RpcServer: await self._fill_prompt("g", "goto", str(target), delay, clear=False) await settle(app, timeout=timeout) - if app._active == "hex": - await self._press(["backslash"], lambda: app._active != "hex", + if app.is_hex: + await self._press(["backslash"], lambda: not app.is_hex, timeout, "leave the hex view") view = _active_widget(app) if isinstance(view, HexView): @@ -1122,13 +1122,13 @@ class RpcServer: if app._active != before: return True # Fallback case: a tab toward pseudocode on a function Hex-Rays - # can't decompile snaps `_active` back to disasm (see + # can't decompile lands back on the LISTING (see # App._apply_decomp), so `_active` never changes and the naive # `_active != before` predicate would block for the full # timeout. Treat "requested decomp but it's known-failed" as # settled (the decompile is cached, so this is cheap). cur = app._cur - if before == "disasm" and cur is not None: + if before == ViewMode.LISTING and cur is not None: try: return app.program.decompile(cur.ea).failed except Exception: # noqa: BLE001 @@ -1137,7 +1137,7 @@ class RpcServer: return await self._press(["tab"], _toggled, timeout, "toggle_view") if method == "hex": - return await self._press(["backslash"], lambda: app._active == "hex", + return await self._press(["backslash"], lambda: app.is_hex, timeout, "hex") if method == "graph": return await self._graph(params, timeout) diff --git a/idatui/trace_ctl.py b/idatui/trace_ctl.py index 5f17e49..46d4b17 100644 --- a/idatui/trace_ctl.py +++ b/idatui/trace_ctl.py @@ -143,7 +143,7 @@ class TraceController: # from the pseudocode navigates to an address, which opens the listing — # so stepping through C threw you out of C on the first keypress. app._goto_ea(pc, push=False, - prefer_decomp=(app._active == "decomp")) + prefer_decomp=(app.is_decomp)) def seek_split(self, pc: int) -> bool: """Put BOTH panes on ``pc``. True if handled. @@ -342,7 +342,7 @@ class TraceController: if not self._need_trace(): return t = self.trace - if app._active == "hex": + if app.is_hex: hx = app._try_view(M.HexView) va = hx.cursor_va() if hx is not None else None if va is None: |