| Commit message (Collapse) | Author | Age |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Reported still dead on a live session after the previous fix. Stacks move the
frame twice more, and neither move was in the hit-test:
- a stack list is drawn over the top rows of its visible member, pushing that
pane's frame down. The renderer applies this as a frame geom override
(reserved_top_rows); the click side did not, so every pane in a stack was
clickable one row above its own title. frame_rect_with_top_reserved() now
applies the same shift, before the gap inset, in the same order as render;
- a stack's collapsed members drew a button on their one-row title. Nothing
could honour it -- that row is the stack's picker, and "split the pane that
is not on screen" is not a thing to ask anyway. They no longer draw one, and
the click side mirrors the condition. 120 snapshot lines change, every one
of them a one-liner losing its button and nothing else (same width, same
content otherwise; audited mechanically).
Both confirmed by reintroducing each bug and watching the check fail. A third
candidate fix -- resolving a click to the stack's visible member, on the theory
that get_pane_at could return a collapsed sibling -- turned out to be
unnecessary: collapsed members have one-row geoms, so position lookup already
lands on the right pane. Removed rather than kept "just in case".
The check itself was wrong twice before it was right, in the direction that
matters most (reporting failures that were its own): it now reads until the pty
goes quiet instead of for a fixed time, and parses only a freshly forced
repaint, so a half-arrived screen cannot look like a button drawn where it is
not. It clicks every button it can see, and runs against config/config.kdl as
well, whose stacks the minimal config never had.
When the two disagree, the server's own log settles it: log::info! in
intercept_split_button_click, read /tmp/sl0ppij-$UID/sl0ppij-log/.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The `+` shipped in 0.1.7 and 0.1.8 without ever appearing on a live session,
while rendering in 265 snapshots. Four faults, each enough on its own:
- title_line_without_middle computed the right side only inside the left
side's and_then, so a pane with no title (hide_default_pane_names, the live
default) got none at all;
- title_line_with_middle discarded the right side whenever the left was
absent -- that is every frame in a session with a second client, which the
live box always had, and "MY FOCUS AND:" on every frame was saying so;
- the title was budgeted before the button, so a title longer than the frame
(any shell showing a path) consumed its columns. The button is anchored and
hit-tested by pure geometry, so it cannot be the part that loses;
- the click hit-tested position_and_size() while the frame is drawn inset by
the pane gap, putting the clickable columns two right of the glyph and a row
above it at the top of the screen. Hence "the click works" and "nothing is
drawn" both being true, and that click test proving nothing.
Adds Pane::frame_rect(), the rect the frame is really drawn in, which the
status bar buttons had already had to work around by hand.
Also fixes render_my_focus building its short form from separators that
Vec::append had already drained: 4 cells wide while reporting 6, a title line
two cells short of its pane. Found by asserting the width in the new test.
Verification, since unit tests have now been insufficient here four times:
split_button_is_drawn_where_it_is_hit_tested covers the combinations the live
config produces, and packaging/checks/split-button-live.py (make check-live)
reads the glyph off a real session, attaches a second client to force the
middle builder, and clicks the columns it found the glyph in. Both confirmed
to fail on the parent commit.
|
| |
|
|
|
|
| |
A right-aligned title no longer runs flush to the corner: the split button now
occupies SPLIT_BUTTON_WIDTH columns between them. Adjusts the expectation rather
than the layout, since that gap is the intended design.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The hover-gated version did not work. `mouse_is_hovering_over_pane` never became
true in a live session, so the `+` was invisible while its hit-test -- which is
geometric and never consulted hover -- kept working. Clickable but invisible is
the worst of both, and it is exactly the failure the shared
`split_button_columns()` was supposed to prevent: that guarantees render and
hit-test agree on WHERE, not on WHETHER.
Reported as "I hover over panes but don't see a +". My end-to-end test had
proved the click, not the button, and the passing snapshots only proved the
renderer works when the flag is set.
Why the flag is false live is still open and is written into the code comment:
the plumbing from `mouse_hover_pane_id` through `FrameParams` reads correctly,
and the config that reproduces it sets both `advanced_mouse_actions` and
`mouse_hover_effects`. Re-gate on hover only once that is understood AND shown
on a real session rather than in a snapshot.
265 snapshots updated: every pane frame now carries the button. 233 are
mechanically provable as button-only (the ` + ` replaces three horizontal glyphs
before a corner); the remaining 32 differ only by a header line offset in the
comparison, with the same substitution underneath.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Switching panes, switching tabs, renaming, reordering and resizing all have a
mouse path in this fork. Spawning a pane did not: it was keyboard-only.
A `+` now appears at the right end of a pane's title line while the pointer is
over that pane, and clicking it splits the pane. Hover-driven rather than always
drawn, for the same reason the resize hint and the status bar button highlight
are: a permanent `+` on every frame is noise, and the pointer being there is
exactly when the button is useful.
render ui/pane_boundaries_frame.rs::render_split_button
hit tab/mouse_handler.rs::intercept_split_button_click
shared split_button_columns(), so what is clickable is what is visible
The button sits immediately left of the top-right corner and the existing scroll
and pin indications get the room that is left. That ordering is deliberate: a
fixed position relative to the pane's right edge is one the mouse handler can
hit-test directly, instead of re-deriving the whole title layout the way
`status_bar_button_at` has to.
The clicked pane is focused first, then the split is requested exactly as a
keybinding would (`PtyInstruction::SpawnTerminal` with `NoPreference`), so mouse
and keyboard produce the same arrangement and the split lands on the pane whose
button was clicked rather than whichever pane happened to be focused.
Not drawn on floating panes: their PIN control owns that corner and is
hit-tested by its drawn position, so anything to its right silently moves it out
from under the pointer. Caught by
test_ctrl_click_on_floating_pin_button_toggles_pin, which stopped pinning.
Verified on the test box by injecting real SGR mouse events into an attached
client's pty at 160x45:
click on the button 1 -> 2 panes
click on the title 1 -> 1
click mid-frame 1 -> 1
Two hover snapshots updated, and only those two: the `+` on the hovered pane
(including an unfocused one -- splitting a pane you are not in is useful).
zellij-server 1502 pass, zellij-utils 473 pass.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
`status_bar_button_style "indexed"` renders `1:Approve 2:Reject` instead of
`[Approve] [Reject]`, so the bar doubles as a key legend for a harness that binds
alt+1..9 to the same actions.
A config option rather than a protocol field: whether the numbers mean anything
depends on what the USER has bound, not on what the program knows. It needs no
wire change and so no version bump, and the click report still carries the id --
never the index -- so a program is unaffected by which style is in force.
The style is threaded into layout_status_bar, the one function the renderer draws
from and the hit-test resolves against. That is what makes this safe: changing a
button's rendered width necessarily changes its clickable span too, verified by a
test asserting span width equals the drawn width and that every drawn column
resolves back, for both styles.
Also fixes the web client's Style construction to read the option from config
rather than defaulting it -- my first pass claimed that code had no pane_frames
config available, which was wrong; it uses it two lines further down.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A click target with no hover feedback gives you no way to tell what you are about
to hit, which matters more here than elsewhere because the buttons sit in a frame
row that is only one cell tall.
The hovered button is inverted rather than merely recoloured: swapping
fore/background reads regardless of which colours a theme uses, and makes "the
pointer is on THIS one" unmistakable next to its unhovered neighbours.
Tracked per client, because hover belongs to a pointer rather than to a pane --
with two users attached, one pointer must not light up the other's button. Stored
on the pane keyed by client id, which the frame renderer already has.
Updated before the action dispatch rather than in the hover action, because
motion over the ACTIVE pane is dispatched as SendToTerminal, not UpdateHover --
and the pane you are about to click a button in is usually the one you are
already in. Every other pane's hover for that client is cleared on each motion,
so moving between panes cannot leave a button lit behind.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Second slice of the status/action frame. A program declares buttons, and a click
is reported back to it:
printf '\033]5577;1;buttons;approve:Approve;reject:Reject\033\\'
-> click -> program's stdin receives OSC 5577 ; 1 ; click ; approve ST
The report is a FIXED format carrying only the id, never bytes the payload chose,
and ids are restricted to [A-Za-z0-9_-]. The sequence that creates a button is
in-band and untrusted -- `cat` of a hostile file emits it as readily as a
cooperating program -- so a click that could send arbitrary bytes would let
viewing a file inject into the stdin of whatever is running, a shell included.
Labels are '%'-escaped since the wire format is ';'-separated, and both the
button count and id length are capped because the list lives as long as the pane.
Positions come from one layout_status_bar function that the renderer draws from
and the hit-test resolves against. Computing that geometry twice is how the
stacked-pane picker once selected the wrong pane; a test asserts every drawn
column resolves back to the button drawn there, across 100 widths.
Two things the drive caught that unit tests could not:
- The first delivery path pushed onto grid.pending_messages_to_pty, which is
only drained when the PANE produces output -- so a click on an idle program sat
in the queue forever. The write now happens at the tab level, which owns the
senders.
- The hit-test derived the frame row from the pane's raw geometry, but this fork
draws the frame inset by gap_offset, so with `gap 1` every click missed by one
row. It now derives from the CONTENT rect, which is by definition the inside of
the drawn frame and therefore the same columns the renderer lays out.
Buttons serialise with the session like the status text, so a resurrected pane
comes back with its buttons intact.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
First slice of the status/action frame: one row of program-supplied text in a
pane's bottom frame row.
printf '\033]5577;1;status;building 3/7\033\\'
printf '\033]5577;1;clear\033\\'
Rendered in the EXISTING frame row rather than in reserved rows. Reserving would
shrink the pane's content area and resize its PTY whenever the bar appeared or
disappeared, firing SIGWINCH at the program that asked for it -- the same churn
that made the stack-list picker use a fixed cap. The frame row is already a text
surface with a precedence chain, so this cost no geometry work at all.
State lives on Grid like the window title, so it survives re-renders, resizes
and detach/reattach with no draining. Session resurrection is NOT covered yet.
Versioned from the start, and unknown versions or verbs are ignored, so the
planned button verbs cannot be half-interpreted by an older build. Text is the
remaining params rejoined with ';', which means a single text field needs no
escaping -- the trick OSC 0/2 already uses for titles.
Treated as untrusted, because it is: an in-band sequence is emitted just as
readily by `cat` of a hostile file as by a cooperating program. Control
characters are stripped -- a raw ESC could otherwise repaint anything on screen,
a newline would corrupt the frame row -- and the length is capped, since the
string is retained for the life of the pane.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The boxed entries read as clutter: every entry bracketed in vertical bars, and
the active one marked by a "> " that sits outside its own cell.
`stack_list_style "minimal"` drops both. The active entry is shown by
inverting it instead, which needs no glyph and no column, and the padding is
moved inside the styled run so the inverted block covers the whole cell rather
than leaving unstyled gaps at its edges. Four fewer columns of decoration per
entry, so more fit per row in grid mode.
Uses ribbon_selected rather than text_selected. Themes give ribbon_selected
real contrast because it marks the selected item elsewhere in zellij's UI --
gruber yellow here, white-on-blue in the TempleOS theme -- whereas
text_selected's background is 40,40,40 against a 24,24,24 terminal and read as
essentially no highlight when tried.
Decoration width comes from the style itself, so Tab's column arithmetic and
the renderer cannot disagree about how wide an entry is. Default stays boxed,
so nothing changes for anyone who does not ask.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Two problems made the stack list unusable for panes nothing had named yet,
which is the common case right after opening them -- and the responsive
collapse walks straight into it, since collapsing is exactly when the list
becomes the only way to pick a pane.
`hide_default_pane_names` no longer applies to stack list entries. In a frame
an empty title is fine: the pane is still visible, sized and positioned, so
you can tell what it is by looking at it. In the stack list the label is the
ENTIRE affordance, so blanking it leaves rows that cannot be identified or
told apart. Entries fall back to the "Pane #N" placeholder even when frames
are configured to hide it.
Entries are also prefixed with their 1-based position, so they stay countable
and addressable even when several share a title or have none. The prefix is
built by one shared helper because the renderer and Tab's column-width
calculation must agree on its width or the list misaligns.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
`ui { pane_frames { inactive_grayscale 0-100 } }`, default 0 (off).
Real colour transformation, not the SGR 'faint' attribute zellij already uses
for frames: faint is terminal-dependent, several terminals only apply it to
the 16 ANSI colours, and it does not remove colour. Each cell's colour is
resolved to RGB and blended toward its own Rec.709 luminance, so an unfocused
pane keeps its brightness but drains of colour.
Colour resolution covers the cases that actually occur: RgbCode directly,
ColorIndex via eightbit_to_rgb, and NamedColor by mapping to its 0-15 index.
Cells with NO explicit colour are deliberately left alone - they render in the
terminal default, which is already unsaturated, and rewriting them would mean
emitting an explicit colour for nearly every cell for no visible gain.
Two non-obvious pieces were needed to make it actually work:
- The output buffer only emits CHANGED cells, so an idle pane would keep its
old colours indefinitely after losing focus. Pane::refresh_for_focus_change
forces a full repaint, called from ActivePanes::insert (the single place
focus changes). It is a no-op when the feature is off, so it costs nothing
by default.
- Terminal panes render through the SHARED multi-client path. Focus is per
client, so once unfocused panes are desaturated two clients may need
different output for the same pane. Both tiled and floating panes now fall
back to per-client rendering when grayscale is enabled - the reason this is
opt-in.
Known limitation: sixel/kitty image chunks are not colour-transformed and stay
in colour.
Hot-reloads like the other sl0p options. Tests cover the transform: full
strength yields a true neutral grey, partial sits between original and grey,
indexed and named colours resolve rather than being skipped, luminance is
perceptual (green brighter than blue) not a flat average, already-grey is
unchanged, and non-colour codes are untouched.
Baselines held: zellij-server 1436/30, zellij-utils 436/5.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The previous ghosting fix only covered ONE of the two regions the insets
carve out. With `padding N` there is a second unowned region: the cells
between the frame border and the content rect. Nothing wrote them, so when
a pane grew, cells that had previously held another pane's border or title
kept those glyphs - the reported 'old pane title/border repeated in the gap
space'.
Both rings are now blanked at every frame-render site:
1. allocation \ drawn frame (outer gap)
2. frame inner \ content rect (inner padding)
Frameless mode is explicitly excluded from ring 2. With pane frames off the
cells around the content belong to ui/boundaries.rs, which draws the
inter-pane boundaries there, and content_offset deliberately leaves room for
them. Blanking that region erased the boundaries and broke three tests
(render_stacks_without_pane_frames,
swap_tiled_layout_with_stacked_children_and_no_pane_frames,
send_cli_toggle_pane_frames_action). Collapsing the interior onto the
content rect emits no ring at all in that mode.
gap_ring_chunks is now robust to any rect relationship: spans are clamped to
`outer`, so a mis-clamped caller cannot make it write outside the pane's own
allocation. Tested with inner rects that cover, miss, straddle and degenerate
against outer.
Suite back to baseline: 1421 passed / 30 pre-existing failures.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
With a gap configured, PaneFrame::render() emits CharacterChunks only for
the INSET frame. The gap ring - the cells between a pane's allocated
geometry and the smaller frame drawn inside it - was written by nobody.
On a fresh paint that looks correct, but only because the screen had just
been cleared. As soon as panes are moved or resized, whatever was
previously drawn in those cells survives, which is the ghosting/artifacts
seen while dragging pane borders.
gap_ring_chunks() emits explicit blanks for that ring, restoring the
renderer's existing invariant that every cell of a pane's allocation is
written by exactly one pane on every render. It is appended at all four
frame-render sites (tiled + plugin panes, cached and uncached paths), and
is a no-op when gap is 0 so the default path is untouched.
Tests assert the ring never overlaps itself, never escapes the allocation,
never overdraws the frame, has exactly (outer area - inner area) cells, and
that ring + frame together tile the allocation with no holes - a hole being
exactly what produces the artifacts.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Adds `ui { pane_frames { title_alignment "left"|"center"|"right" } }`.
Full-frame panes previously hardcoded the title flush left, while frameless
panes (pane_frame_style "titles") already centered it via
compose_bracketed_title. This brings full frames up to parity and makes the
position configurable.
Implementation notes:
- The value rides on `Style`, which is already threaded to FrameParams, so no
new plumbing through Tab/PaneContentsAndUi was needed.
- It is deliberately NOT round-tripped over the plugin protobuf boundary:
plugins have no use for frame title alignment and adding a proto field
would force regenerating the committed prost assets in assets/prost/.
- Left keeps the original code path untouched, so default configs render
exactly as before.
- The geometry loop clamps the title start against the right-side indicators
and breaks on `>=` rather than `==`, so a mis-clamped segment cannot spin.
Tests: alignment ordering, frame width preservation across widths, and
narrow-pane safety (cols 1..24 must not panic or corrupt width).
|
| |
|
|
|
|
|
|
|
| |
- pane_boundaries_frame: replace 'SCROLL: 42/1000' with a single-glyph
indicator ('up-arrow'42), and only show it when actually scrolled up
rather than whenever scrollback exists.
- tab-bar: rebrand the prefix to sl0p.foo.
Pre-existing local work, committed as the base of the sl0p fork.
|
|
|
Squashed import of upstream zellij at 0e6e4404 ("Support the Kitty Image
Protocol (#5428)"), the merge-base our fork was developed against. Upstream's
3311 commits are deliberately NOT replayed here; only our own fork commits are,
so the monorepo stays small and `git log sl0ppij/` shows sl0p work, not zellij's
entire history.
Upstream provenance is tracked in FORKS.md and can always be re-fetched from
https://github.com/zellij-org/zellij.
|