| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Reported still dead on a live session after the previous fix. Stacks move the
frame twice more, and neither move was in the hit-test:
- a stack list is drawn over the top rows of its visible member, pushing that
pane's frame down. The renderer applies this as a frame geom override
(reserved_top_rows); the click side did not, so every pane in a stack was
clickable one row above its own title. frame_rect_with_top_reserved() now
applies the same shift, before the gap inset, in the same order as render;
- a stack's collapsed members drew a button on their one-row title. Nothing
could honour it -- that row is the stack's picker, and "split the pane that
is not on screen" is not a thing to ask anyway. They no longer draw one, and
the click side mirrors the condition. 120 snapshot lines change, every one
of them a one-liner losing its button and nothing else (same width, same
content otherwise; audited mechanically).
Both confirmed by reintroducing each bug and watching the check fail. A third
candidate fix -- resolving a click to the stack's visible member, on the theory
that get_pane_at could return a collapsed sibling -- turned out to be
unnecessary: collapsed members have one-row geoms, so position lookup already
lands on the right pane. Removed rather than kept "just in case".
The check itself was wrong twice before it was right, in the direction that
matters most (reporting failures that were its own): it now reads until the pty
goes quiet instead of for a fixed time, and parses only a freshly forced
repaint, so a half-arrived screen cannot look like a button drawn where it is
not. It clicks every button it can see, and runs against config/config.kdl as
well, whose stacks the minimal config never had.
When the two disagree, the server's own log settles it: log::info! in
intercept_split_button_click, read /tmp/sl0ppij-$UID/sl0ppij-log/.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The hover-gated version did not work. `mouse_is_hovering_over_pane` never became
true in a live session, so the `+` was invisible while its hit-test -- which is
geometric and never consulted hover -- kept working. Clickable but invisible is
the worst of both, and it is exactly the failure the shared
`split_button_columns()` was supposed to prevent: that guarantees render and
hit-test agree on WHERE, not on WHETHER.
Reported as "I hover over panes but don't see a +". My end-to-end test had
proved the click, not the button, and the passing snapshots only proved the
renderer works when the flag is set.
Why the flag is false live is still open and is written into the code comment:
the plumbing from `mouse_hover_pane_id` through `FrameParams` reads correctly,
and the config that reproduces it sets both `advanced_mouse_actions` and
`mouse_hover_effects`. Re-gate on hover only once that is understood AND shown
on a real session rather than in a snapshot.
265 snapshots updated: every pane frame now carries the button. 233 are
mechanically provable as button-only (the ` + ` replaces three horizontal glyphs
before a corner); the remaining 32 differ only by a header line offset in the
comparison, with the same substitution underneath.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Switching panes, switching tabs, renaming, reordering and resizing all have a
mouse path in this fork. Spawning a pane did not: it was keyboard-only.
A `+` now appears at the right end of a pane's title line while the pointer is
over that pane, and clicking it splits the pane. Hover-driven rather than always
drawn, for the same reason the resize hint and the status bar button highlight
are: a permanent `+` on every frame is noise, and the pointer being there is
exactly when the button is useful.
render ui/pane_boundaries_frame.rs::render_split_button
hit tab/mouse_handler.rs::intercept_split_button_click
shared split_button_columns(), so what is clickable is what is visible
The button sits immediately left of the top-right corner and the existing scroll
and pin indications get the room that is left. That ordering is deliberate: a
fixed position relative to the pane's right edge is one the mouse handler can
hit-test directly, instead of re-deriving the whole title layout the way
`status_bar_button_at` has to.
The clicked pane is focused first, then the split is requested exactly as a
keybinding would (`PtyInstruction::SpawnTerminal` with `NoPreference`), so mouse
and keyboard produce the same arrangement and the split lands on the pane whose
button was clicked rather than whichever pane happened to be focused.
Not drawn on floating panes: their PIN control owns that corner and is
hit-tested by its drawn position, so anything to its right silently moves it out
from under the pointer. Caught by
test_ctrl_click_on_floating_pin_button_toggles_pin, which stopped pinning.
Verified on the test box by injecting real SGR mouse events into an attached
client's pty at 160x45:
click on the button 1 -> 2 panes
click on the title 1 -> 1
click mid-frame 1 -> 1
Two hover snapshots updated, and only those two: the `+` on the hovered pane
(including an unfocused one -- splitting a pane you are not in is useful).
zellij-server 1502 pass, zellij-utils 473 pass.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Completes the two pieces deferred from the first workspace-hints pass.
`zellij run --purpose X` / `zellij action new-pane --purpose X` tag a pane at
spawn time, which is what an agent wants for panes it creates itself; the OSC
wrapper still works for programs that declare their own role. Not supported with
--in-place, which replaces another pane rather than being a pane of its own: clap
rejects the combination rather than accepting a flag that would do nothing.
`tab name="work" purpose="agent-work"` gives a whole tab a role, reported by
`list-tabs --json`. It rides the tab's ROOT layout node, reusing the pane field
because a tab's root is the tab container and never itself a pane -- asserted by a
test for the tightest case (a tab holding exactly one pane), since a leak there
would silently mislabel a pane.
The interesting part is why the flag first shipped broken. There are TWO protobuf
boundaries -- the plugin API and the client->server IPC contract -- and a CLI flag
must cross the second one. Defaulting the field in the conversion (what "no
protoc" usually forces) compiles cleanly and then silently drops the value in
transit, so --purpose parsed, printed a pane id, and did nothing. Fixed by adding
the field to both contracts by hand, in the .proto AND the committed generated
prost, kept in lockstep so a future regeneration reproduces it: protoc is only
needed to regenerate, not to build. Both boundaries now have a round-trip test,
and the IPC one was confirmed to fail when the wire read is removed.
Sanitising moved to Grid::set_authoritative_purpose, the single choke point every
out-of-band source passes through, after the CLI path was observed delivering
`bad purpose; rm -rf /` intact into list-panes --json.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Implements the zellij half of sl0p/workspace-hints-proposal.md: a pane can carry
an opaque agent-facing hint for what it is FOR, so a project can ship a layout
that an agent is able to navigate instead of guessing.
zellij never interprets a purpose. The consuming agent owns the entire vocabulary,
which is what keeps this to one string threaded along the existing status_bar path
rather than a policy engine, and lets the vocabulary change without a rebuild.
Two ways in, because declared panes and agent-created panes are different:
layout: pane name="server" purpose="dev-server"
in-band: printf '\033]5577;1;purpose;agent:build\033\\'
The second exists because tagging at spawn time would mean threading a field
through 28 SpawnTerminal call sites, and a new action variant is impossible while
protobuf enums cannot be regenerated. Wrapping the command costs one printf.
A declared purpose outranks an in-band one and cannot be overridden or cleared by
it. OSC arrives from whatever the pane happens to be showing, so otherwise a
`cat hostile.txt` in the human's editor pane could relabel it as the agent's
scratch pane and invite an agent to run commands where the human is working. A
layout is written by a human in a file they can read; in-band data only fills a
blank.
Exposed on PaneListEntry (`list-panes --json`) rather than PaneInfo, which crosses
the plugin protobuf API we cannot regenerate; resolved in the screen thread where
panes live rather than via route.rs's per-pane PTY round-trips. Values are
sanitised to a bounded [A-Za-z0-9_.:/-] token at both entry points, because a
purpose is never rendered -- it is matched against and pasted into consumers'
shell and JSON pipelines.
Verified end to end rather than by inspection: purposes from a layout appear in
list-panes --json against the right pane ids, an agent-spawned pane tags itself,
a declared purpose survives an in-band override attempt, all of it comes back
after kill + resurrect, an unknown pane property is still a parse error, and a
layout with no purpose leaves dump-layout unchanged.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Second slice of the status/action frame. A program declares buttons, and a click
is reported back to it:
printf '\033]5577;1;buttons;approve:Approve;reject:Reject\033\\'
-> click -> program's stdin receives OSC 5577 ; 1 ; click ; approve ST
The report is a FIXED format carrying only the id, never bytes the payload chose,
and ids are restricted to [A-Za-z0-9_-]. The sequence that creates a button is
in-band and untrusted -- `cat` of a hostile file emits it as readily as a
cooperating program -- so a click that could send arbitrary bytes would let
viewing a file inject into the stdin of whatever is running, a shell included.
Labels are '%'-escaped since the wire format is ';'-separated, and both the
button count and id length are capped because the list lives as long as the pane.
Positions come from one layout_status_bar function that the renderer draws from
and the hit-test resolves against. Computing that geometry twice is how the
stacked-pane picker once selected the wrong pane; a test asserts every drawn
column resolves back to the button drawn there, across 100 widths.
Two things the drive caught that unit tests could not:
- The first delivery path pushed onto grid.pending_messages_to_pty, which is
only drained when the PANE produces output -- so a click on an idle program sat
in the queue forever. The write now happens at the tab level, which owns the
senders.
- The hit-test derived the frame row from the pane's raw geometry, but this fork
draws the frame inset by gap_offset, so with `gap 1` every click missed by one
row. It now derives from the CONTENT rect, which is by definition the inside of
the drawn frame and therefore the same columns the renderer lays out.
Buttons serialise with the session like the status text, so a resurrected pane
comes back with its buttons intact.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The status bar survived detach/reattach (it lives on Grid) but not a
serialise/restore cycle, so a resurrected pane came back blank.
It now travels the whole per-pane serialisation pipeline, mirroring the fork's
existing default_fg/default_bg: pane -> PaneLayoutMetadata ->
PaneLayoutManifest -> TiledPaneLayout -> a status_bar property in the serialised
KDL, then back through the normal layout parser and applied by LayoutApplier
when the pane is recreated.
The sanitiser moved from grid.rs into zellij-utils so both entry points share
one definition. That matters: a layout file on disk is no more trustworthy than
the escape sequence that wrote it -- it may have been hand-edited, or copied from
somewhere else -- so restored text is stripped and length-capped on the way in
just like the OSC payload was.
Verified end to end rather than by unit test alone: set the bar, waited for a
serialisation pass, confirmed status_bar="..." in session-layout.kdl, killed the
session until list-sessions reported EXITED, then attached and watched it come
back from disk. The earlier attempt only proved detach/reattach because Quit had
left the session alive.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Upstream's mouse_hover_effects governs two unrelated things: the frame highlight
on hover, and the "Ctrl <MouseScroll> or <drag borders> to resize" hint. Its own
comment in default.kdl admits as much. So silencing a beginner reminder you have
outgrown also costs you a highlight that stays useful indefinitely.
mouse_hover_help_text (default true) gates only the hint. One line in
execute_send_to_terminal; the highlight is set in execute_update_hover and is
untouched.
Config-file only, deliberately. The option has no protobuf slot, so it does not
cross the client/server IPC contract -- the roundtrip test asserts exactly that,
with the fixture set to None and a comment explaining why. It still works from
the config file because the server parses the file itself and Options::merge
keeps the file value when the client sends None; a CLI flag would be silently
ignored.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The boxed entries read as clutter: every entry bracketed in vertical bars, and
the active one marked by a "> " that sits outside its own cell.
`stack_list_style "minimal"` drops both. The active entry is shown by
inverting it instead, which needs no glyph and no column, and the padding is
moved inside the styled run so the inverted block covers the whole cell rather
than leaving unstyled gaps at its edges. Four fewer columns of decoration per
entry, so more fit per row in grid mode.
Uses ribbon_selected rather than text_selected. Themes give ribbon_selected
real contrast because it marks the selected item elsewhere in zellij's UI --
gruber yellow here, white-on-blue in the TempleOS theme -- whereas
text_selected's background is 40,40,40 against a 24,24,24 terminal and read as
essentially no highlight when tried.
Decoration width comes from the style itself, so Tab's column arithmetic and
the renderer cannot disagree about how wide an entry is. Default stays boxed,
so nothing changes for anyone who does not ask.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
`stack_list_layout "grid"` packs picker entries several per row, which turns
stack_list_max_rows from a count into a space budget: eight panes in a wide
terminal now fit on one row instead of spending three and hiding five.
The entry renderer already drew each entry as a single chunk at its own x/y,
sized by its geom and centring its own label, so a grid needed no rendering
changes at all -- only the loop assigning every entry the same x and the full
width. Column count is derived from the widest label rather than configured, so
it adapts to the titles; one column is the floor and reproduces the previous
full-width rows byte for byte.
The row -> member mapping now has a column axis, and it had already caused one
wrong-pane bug when two consumers disagreed. So the layout is computed once,
by one function, into explicit cells; the renderer, the reserved-row budget and
the mouse hit-test all read those same cells rather than each doing their own
arithmetic. Windowing is by row, so a grid scrolls a whole row at a time and
degrades to the old per-member window when there is one column.
Cells are separated by a two-column gap: without it the focused entry's "> "
marker sits flush against the previous cell and reads as belonging to it.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A stack reserves one row per member plus a padding row, so a deep stack spends
most of the screen listing itself. `stack_list_max_rows` caps that; the list
windows around the focused member and reports the rest as "+N more".
The indicator goes in the padding row the list already reserves, so it costs
no extra row and never displaces a real entry. Entries keep their real rank
rather than renumbering from 1, otherwise the numbering stops meaning anything
once the window has scrolled. The window slides on ordinary focus movement,
which is also why this needs no new keybinding -- Action is a protobuf enum
and the prost assets cannot be regenerated here (no protoc).
A fixed cap rather than hover-to-expand on purpose: reserved_top_rows feeds
pane geometry, so growing the list on hover would resize the pane's PTY and
reflow whatever is running in it on every mouse move. A real expand/collapse
has to be an overlay that reserves nothing, which is a much larger change to
the render path.
reserved_top_rows and the renderer both go through stack_list_window(); if
they disagreed the list would draw into rows the geometry never reserved, i.e.
over the pane beneath it.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A `children` placeholder inserts every pane it receives as a flat sibling.
That single hardcoded policy is why a layout can only express "N equal
columns", "N equal rows" or "one stack" without hand-writing a variant per
pane count -- the max_panes=5 / max_panes=8 / max_panes=12 ladders in a swap
layout file exist purely to work around it.
`pane arrangement="grid" { children; }` builds a tree for N panes instead.
Two to start: grid (ceil(sqrt(n)) columns, rows filled left to right) and
master-stack (one 60%-wide master, the rest beside it).
Generates a TiledPaneLayout rather than geometry, so everything downstream
works unchanged: split_space, the minimum-size feasibility check,
LayoutApplier, swap-layout damage tracking, and the responsive collapse. It
composes with that last one for free -- a grid is simply infeasible on a
narrow terminal, so it is skipped and the collapse takes over.
The arrangement builds ONE self-contained subtree rather than splicing a
variable number of nodes in among the placeholder's siblings, so it stays well
defined next to the pre-existing "children node with sibling nodes" TODO
rather than leaning on it.
Like default_fg/default_bg, the field has no protobuf representation, so it is
defaulted at both plugin-API boundaries and does not survive a round trip.
This is why it is a field rather than a LayoutConstraint variant: a new enum
variant would have no representation when converting TO protobuf, and the
committed prost assets cannot be regenerated here (no protoc).
The 48 snapshot updates are the new field appearing in TiledPaneLayout debug
dumps (324 lines, all `children_arrangement: None`). No snapshot content was
removed. The `expression:` metadata churn in those files is pre-existing drift
that regeneration swept up: the stored snapshots recorded the expression
before normalize_layout_debug was introduced.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Splitting a window into thirds is great until the window is 70 columns wide
and each pane gets 23. `responsive_min_cols` collapses the tab into the swap
layout named by `responsive_layout` when it gets narrower than that, and
restores the previously active layout when it grows back.
Selects a swap layout BY NAME rather than adding a size-aware
LayoutConstraint: that type crosses both the plugin protobuf API and the
client/server contract, and the committed prost assets cannot be regenerated
here (no protoc).
Restoring uses a 10-column hysteresis band. Without a dead band, dragging a
window edge that lands exactly on the threshold flips the layout on every
motion event, and every flip resizes every PTY in the tab.
"Did the user rearrange panes by hand" is judged from the damaged flag as
sampled BEFORE each resize, not the live one: resize_whole_tab's own
auto-layout pass sets that flag itself and clears it again only if it found a
layout that fits, so on a terminal too narrow for any of them it latches true
although nothing was rearranged. And once collapsed, restore stays reachable
regardless of the flag, so damage occurring while collapsed cannot strand the
tab in the narrow layout.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
aa51848d replaced "SCROLL: 42/1000" with a compact "^42" glyph and stopped
showing any indicator when the pane is not actually scrolled up, but did not
refresh the insta snapshots that encode the old upstream frame rendering.
That left 30 failing tests in zellij-server from the very first sl0p commit
onward, which in turn masked 5 more in zellij-utils (cargo stops at the first
failing test binary, so zellij-utils never ran).
Bisected to aa51848d; the upstream fork point 0e6e4404 is green.
zellij-server (44 snapshots): frame titles lose the "SCROLL: 0/N" segment when
not scrolled, and render "^N" where they previously rendered "SCROLL: N/M".
Verified every diff is scroll-only, and that the genuinely-scrolled cases
(2/13, 3/33, 6/33) still render as ^2, ^3 and ^6 rather than disappearing.
zellij-utils (5 snapshots): serialized Config gained the sl0p FrameConfig
fields (title_alignment, gap, padding, gap_aspect, inactive_grayscale,
hide_default_pane_names), all at their existing defaults. Additions only.
Several tests assert multiple snapshots and insta aborts at the first
mismatch, so this took four regenerate/verify passes to fully converge.
zellij-server: 1471 passed, 0 failed.
zellij-utils: 441 passed, 0 failed.
|
|
|
Squashed import of upstream zellij at 0e6e4404 ("Support the Kitty Image
Protocol (#5428)"), the merge-base our fork was developed against. Upstream's
3311 commits are deliberately NOT replayed here; only our own fork commits are,
so the monorepo stays small and `git log sl0ppij/` shows sl0p work, not zellij's
entire history.
Upstream provenance is tracked in FORKS.md and can always be re-fetched from
https://github.com/zellij-org/zellij.
|
